Dell Alienware m17 R2 Service Manual - Page 32
Installing the keyboard-controller board
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. Remove the 2230 solid-state drive. (If applicable) 4. Remove the 2280 solid-state drive. (If applicable) 5. Remove the battery. About this task The following image indicates the location of the keyboard-controller board and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2x1.9) that secure the keyboard-backlight cable to the keyboard-controller board. 2. Disconnect the keyboard-backlight cable from the keyboard-controller board. 3. Open the latch and disconnect the keyboard-controller board cable from the keyboard-controller board. 4. Open the latch and disconnect the keyboard cable from the keyboard-controller board. 5. Pull on the securing tab to release the keyboard-controls board from the palm-rest assembly. 6. Using the plastic tab, pry and remove the keyboard-controller board from the palm-rest assembly. Installing the keyboard-controller board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the keyboard-controller board and provides a visual representation of the installation procedure. 32