Dell C2660dn Dell Color Laser Printer Users Guide - Page 142
Purpose, Reset Defaults, Printer Settings, Values, Security, Set Password, SSL/TLS, IPsec
View all Dell C2660dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Reset Print Server Purpose: To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize NVRAM of the printer from Reset Defaults in the Printer Settings menu. Values: Initialize NIC NVRAM Memory and restart printer. Restart Printer Click Start to initialize NVRAM, revert network settings to the factory default settings, and reboot the network capability. Click Start to reboot the printer. Security The Security tab includes Set Password, SSL/TLS, IPsec, 802.1x, and IP Filter (IPv4). Set Password Purpose: To set or change the password that is required to access the setup parameters of the printer from the Dell Printer Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame. NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM). NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings. Values: Administrator Password Re-enter Administrator Password Access denial by the authentication failure of the Administrator Sets the password using up to 128 alphanumeric characters (excluding spaces and colons). If more than 128 alphanumeric characters are specified, only the first 128 alphanumeric characters will be valid. Confirms the set password. Sets the amount of time the administrator should wait for the access to the printer setup from Dell Printer Configuration Web Tool. Sets the time period from 5 to 255 seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode is disabled. SSL/TLS Purpose: To specify the settings for the SSL encryption communication to the printer, and set/delete the certificate used for IPsec, or Wireless LAN. Values: HTTP-SSL/TLS Communication*1 HTTP-SSL/TLS Communication Port Number SMTP-SSL/TLS Communication Generate Self-Signed Certificate*2 Select the check box to enable the HTTP-SSL/TLS Communication. Sets the port number, which is not identical with that of HTTP for SSL/TLS. This must be 443 or between 8000 and 9999. Sets the type of SSL/TLS used to communicate with the SMTP server. Click to display the Generate Self-Signed Certificate page and to create a security certification from the page. The Generate Self-Signed Certificate button is available only when the self-signed certificate is not generated. Public Key Method Select the public key method of the self-signed certificate. 140 Dell™ Printer Configuration Web Tool