Dell C2660dn Dell Color Laser Printer Users Guide - Page 181
Auto Reset, Fault Time-out, Date & Time, 45sec, seconds, Available Range, 300 seconds, Time Zone
View all Dell C2660dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer. You can also change the status of the printer to the standby mode by pressing any button on the operator panel. If the Power Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the printer back on, physically turn the power switch of the printer to On. Auto Reset Purpose: To automatically reset the settings to the default settings and return to the standby mode after you do not specify any settings for the specified time. Values: 45sec* 1min 2min 3min 4min Fault Time-out Purpose: To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is cancelled if the time-out time is exceeded. Values: Off On* 60 seconds* Available Range: 3-300 seconds Disables the fault time-out. Sets the amount of time the printer waits before canceling a job that stops abnormally. Date & Time Purpose: To specify the date and time formats. Values: Set Date & Time Date Format Time Format Time Zone Date Time 12H 24H* Sets the time zone. Sets the date depending on the Date Format settings. Sets the time. Sets the date format. Sets the time in 12-hour format. Sets the time in 24-hour format. Understanding the Printer Menus 179