Dell C2660dn Dell Color Laser Printer Users Guide - Page 209
Loading Print Media, Capacity, Print Media Dimensions
View all Dell C2660dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
18 Loading Print Media Loading print media properly helps prevent jams and ensures trouble-free printing. Before loading any print media, identify the recommended print side of the print media. This information is usually indicated on the print media package. Capacity Tray1 can hold: • 250 sheets of the standard paper. The optional 550-sheet feeder (tray2) can hold: • 550 sheets of the standard paper. The multipurpose feeder (MPF) can hold: • 150 sheets of the standard paper. Print Media Dimensions The maximum dimensions of print media that tray1 and the optional 550-sheet feeder can handle are: • Width - 148 mm (5.83 inches) to 215.9 mm (8.5 inches) • Length - 210 mm (8.27 inches) to 355.6 mm (14.00 inches) The maximum dimensions of print media that the MPF can handle are: • Width - 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches) • Length - 127 mm (5.00 inches) to 355.6 mm (14.00 inches) Loading Print Media in Tray1 and the Optional 550-Sheet Feeder This section describes how to load letterhead. For details about loading print media other than letterhead, see "Loading Paper." NOTE: To avoid paper jams, do not remove the tray while printing is in progress. NOTE: Use only laser print media. Do not use ink jet paper in the printer. Loading Letterhead (Pre-Printed and Pre-Punched Paper) The pre-printed paper such as letterhead and pre-punched paper must be inserted bottom edge first with the print side facing down as shown below. NOTE: Set Letterhead 2 Sided or Letterhead Duplex Mode to Enable and Paper Type to Letterhead, Preprinted, or Prepunched from the operator panel or the printer driver even when you print on a single side of letterhead, pre-printed, or pre-punched paper. Loading Print Media 207