Dell Inspiron 300m Owner's Manual - Page 113
Disconnect the computer from the electrical outlet.
View all Dell Inspiron 300m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
1 Ensure that the work surface is flat and clean to prevent scratching the computer cover. 2 Save and close any open files, exit any open programs, and then shut down the computer (see "Turning Off Your Computer" on page 41). 3 If the computer is connected to a media base (docked), undock it. See the documentation that came with the media base for instructions. 4 Disconnect the computer from the electrical outlet. 5 Wait 10 to 20 seconds and then disconnect any attached devices. 6 Remove any installed PC Cards or blanks, battery, and devices. NOTICE: Handle memory modules by their edges, and do not touch the components on a module. Ground yourself by touching a metal connector on the back of the computer, and continue to do so periodically during this procedure. 7 Turn the computer over and loosen the two captive screws on the modem cover, and remove the cover. captive screw (2) cover Adding and Re placing Parts 113