Dell Latitude CPi A User Manual - Page 38
Bottom Case Bracket, Disconnect the speaker wires from connectors JP1 and JP2 on the audio
View all Dell Latitude CPi A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
left speaker left speaker wires plastic retaining clip 5-mm screws (3) slot right speaker 1. Remove the back cover assembly. 2. Remove the keyboard assembly. 3. Remove the palmrest assembly. 4. Remove the 5-mm screw securing the audio shield and the 5-mm screw securing the EMI drain wire. 5. Remove the audio board shield. 6. Disconnect the speaker wires from connectors JP1 and JP2 on the audio board. The connectors are fragile-do not pull on the speaker wires to disconnect them. 7. Remove the two 5-mm screws on the left side and one 5-mm screw on the right side of the bottom case bracket. 8. Insert the end of a small flat-blade screwdriver into the slot in the vertical support in the center of the bottom case, and disengage the plastic retaining clip. 9. Lift the bottom case bracket from the computer. 32 Dell Latitude CPi A Service Manual