Dell M4400 Service Manual - Page 28

Removing the Fan, Replacing the Fan

Get Dell M4400 - Precision Mobile Workstation PDF manuals and user guides View all Dell M4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Back to Contents Page Fan Dell Precision™ Service Manual Removing the Fan Replacing the Fan Removing the Fan CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Follow the instructions in Before Working on Your Computer. 2. Close the display and turn the computer over. 3. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly). 4. Remove the three M2.5 x 5-mm screws that secure the fan to the internal framework of the computer. 5. Disconnect the fan connector from the system board. 6. Lift the fan up at an angle to remove it. 1 M2.5 x 5-mm screws (3) 2 fan 3 fan connector Replacing the Fan CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Insert the fan into the fan cavity and align the screw holes in the fan with the screw holes in the base assembly. 2. Install the three M2.5 x 5-mm screws to secure the fan. 3. Connect the fan connector to the system board connector. 4. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly). 5. Follow the procedure After Working on Your Computer. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Back to Contents Page
Fan
Dell Precision™ Service Manual
Removing the Fan
Replacing the Fan
Removing the Fan
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Close the display and turn the computer over.
3.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
4.
Remove the three M2.5 x 5-mm screws that secure the fan to the internal framework of the computer.
5.
Disconnect the fan connector from the system board.
6.
Lift the fan up at an angle to remove it.
Replacing the Fan
1.
Insert the fan into the fan cavity and align the screw holes in the fan with the screw holes in the base assembly.
2.
Install the three M2.5 x 5-mm screws to secure the fan.
3.
Connect the fan connector to the system board connector.
4.
Replace the bottom of the base assembly (see
Replacing the Bottom of the Base Assembly
).
5.
Follow the procedure
After Working on Your Computer
.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1
M2.5 x 5-mm screws (3)
2
fan
3
fan connector
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.