Dell M4400 Service Manual - Page 31

Replacing an FCM

Get Dell M4400 - Precision Mobile Workstation PDF manuals and user guides View all Dell M4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Replacing an FCM NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the module and on the system board, and realign the module. NOTICE: To avoid damage to the FCM, ensure the cables are not under the module when you install it. NOTICE: The Mini-Card slot has WPAN/UWB/FCM silk-screened inside the slot. Do not install an FCM in any other Mini-Card slot. 1. Slide the FCM into the connector at a 30-degree angle to the system board. 2. Press the module down onto the alignment post and hold in position. 3. Replace the screw to secure the FCM to the base assembly. 4. Replace the left hinge cover (see Replacing the Hinge Covers) if necessary. 5. Replace the bottom of the base assembly (see Removing the Bottom of the Base Assembly). 6. Follow the procedure After Working on Your Computer. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Replacing an FCM
1.
Slide the FCM into the connector at a 30-degree angle to the system board.
2.
Press the module down onto the alignment post and hold in position.
3.
Replace the screw to secure the FCM to the base assembly.
4.
Replace the left hinge cover (see
Replacing the Hinge Covers
) if necessary.
5.
Replace the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
6.
Follow the procedure
After Working on Your Computer
.
Back to Contents Page
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the module and on the system board,
and realign the module.
NOTICE:
To avoid damage to the FCM, ensure the cables are not under the module when you install it.
NOTICE:
The Mini-Card slot has WPAN/UWB/FCM silk-screened inside the slot. Do not install an FCM in any other Mini-Card slot.