Dell OptiPlex 7080 Small Form Factor Service Manual - Page 18
Front bezel, Removing the front bezel
View all Dell OptiPlex 7080 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Steps 1. Slide the intrusion switch into the slot on the chassis. 2. Connect the intrusion switch cable to the connector on the system board. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Front bezel Removing the front bezel Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. About this task The following images indicate the location of the front bezel and provide a visual representation of the removal procedure. 18 Field service information
Steps
1.
Slide the intrusion switch into the slot on the chassis.
2.
Connect the intrusion switch cable to the connector on the system board.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Front bezel
Removing the front bezel
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
18
Field service information