Dell OptiPlex 7080 Small Form Factor Service Manual - Page 20
Hard-drive assembly, Removing the 2.5 in. hard-drive assembly
View all Dell OptiPlex 7080 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Steps 1. Align the tabs from the right portion of the front bezel with the slots on the system chassis. 2. Move the bezel towards the system until the three tabs from the left portion of the bezel snap onto the chassis securing the bezel in place. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Hard-drive assembly Removing the 2.5 in. hard-drive assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. About this task The following images indicate the location of the 2.5 in. hard-drive assembly and provide a visual representation of the removal procedure. 20 Field service information
Steps
1.
Align the tabs from the right portion of the front bezel with the slots on the system chassis.
2.
Move the bezel towards the system until the three tabs from the left portion of the bezel snap onto the chassis securing the
bezel in place.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Hard-drive assembly
Removing the 2.5 in. hard-drive assembly
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
front bezel
.
About this task
The following images indicate the location of the 2.5 in. hard-drive assembly and provide a visual representation of the removal
procedure.
20
Field service information