Dell OptiPlex 7080 Small Form Factor Service Manual - Page 28
Steps, Next steps, Field service information
View all Dell OptiPlex 7080 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1. Align the solid-state drive with the socket on the system board and slide it in. 2. Replace the screw (M2x3) that secures the solid-state drive to the system board. 3. Route the SATA cables through the cable management tab. 4. Secure the metal bracket to the chassis by installing the two (6x32) screws. Next steps 1. Install the 2.5 in. hard drive assembly. 2. Install the front bezel. 3. Install the side cover. 4. Follow the procedure in after working inside your computer. 28 Field service information
Steps
1.
Align the solid-state drive with the socket on the system board and slide it in.
2.
Replace the screw (M2x3) that secures the solid-state drive to the system board.
3.
Route the SATA cables through the cable management tab.
4.
Secure the metal bracket to the chassis by installing the two (6x32) screws.
Next steps
1.
Install the
2.5 in. hard drive assembly
.
2.
Install the
front bezel
.
3.
Install the
side cover
.
4.
Follow the procedure in
after working inside your computer
.
28
Field service information