Dell OptiPlex 7080 Small Form Factor Service Manual - Page 35
Expansion card, Removing the graphics card
View all Dell OptiPlex 7080 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Steps 1. Place the coin cell battery onto the socket on the system board. Ensure that the "+" sign is facing up and the tabs on the lower portion of the socket and holding the battery. 2. Gently push the battery into the socket until it locks in place. Next steps 1. Install the front bezel. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Expansion card Removing the graphics card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. About this task The following images indicate the location of the graphics card and provide a visual representation of the removal procedure. Field service information 35
Steps
1.
Place the coin cell battery onto the socket on the system board. Ensure that the "+" sign is facing up and the tabs on the
lower portion of the socket and holding the battery.
2.
Gently push the battery into the socket until it locks in place.
Next steps
1.
Install the
front bezel
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Expansion card
Removing the graphics card
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
Field service information
35