Dell PowerEdge 2300 User's Guide - Page 105
card installed, you will see only the drive online and drive bay empty indicator
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
hard-disk drive failure indicator hard-disk drive activity indicator hard-disk drive online indicator Table 7-2 lists the drive indicator patterns established by the SCSI backplane board firmware. Different patterns are displayed as drive events occur in the system. For example, in the event of a hard-disk drive failure, the "drive failed" pattern appears. After the drive is selected for removal, the "drive being prepared for removal" pattern appears, followed by the "drive ready for insertion or removal" pattern. After the replacement drive is installed, the "drive being prepared for operation" pattern appears, followed by the "drive online" pattern. NOTE: If you do not have a Dell PowerEdge Expandable RAID Controller host adapter card installed, you will see only the "drive online" and "drive bay empty" indicator patterns. Identify drive Drive being prepared for removal Drive ready for insertion or removal Drive being prepared for operation Drive bay empty Drive predicted failure All three drive status indicators blink simultaneously. The three drive status indicators flash sequentially. All three drive status indicators are off. The drive online indicator is on. The drive activity light may flash briefly. All three drive status indicators are off. The drive online indicator is on. The drive failure indicator blinks on briefly each second. Installing SCSI Hard-Disk Drives 7-5