Dell PowerEdge 2300 User's Guide - Page 25
Dell Server Assistant, Select - boot to cd
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
This chapter describes the bootable Dell Server Assistant CD and tells you how to use the utilities, diagnostics, documentation, drivers, and other items included on the CD. Most of the functions available on the Dell Server Assistant CD are also available using a bootable utility partition that is installed on your hard-disk drive. This chapter describes the utility partition and provides instructions for reinstalling the partition (if necessary) and information about using the utility partition menu. This chapter also describes how to install various software drivers for the supported operating systems. The system must be running to insert the CD. To boot from the CD, insert it into the PowerEdge 2300 system's CD-ROM drive and press the reset button. When the system boots, the CD main menu appears. If the CD does not boot, check the following: In the system setup program, the Secondary SCSI category must be set to On and the Boot Sequence category must be set to Diskette First (both of these options are the defaults for their respective categories). See Chapter 4, "Using the System Setup Program," for more information. In the SCSISelect utility, the BIOS Support For Bootable CD-ROM category must be set to Enabled. See Chapter 3, "Installing and Configuring SCSI Drivers," for more information. Selections can be made from the CD menus using either a keyboard or mouse. Associated help information is displayed in the help box at the bottom of the screen in the currently selected language (specified via a menu option). Click Back to return to the previous menu. Click Exit (or press ) to exit the program. Exiting the program causes the system to reboot to the standard operatingsystem boot partition. Using the Dell Server Assistant CD 2-1