Dell PowerEdge 2300 User's Guide - Page 85
before, after
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
A list of expansion slots and the cards in them appears on the screen. Remember to save a printout or written copy of the new information. Use the following procedure before an ISA expansion card is removed but after a PCI expansion card is removed. See "When to Run the Resource Configuration Utility" found earlier in this chapter for more detailed information. A list of expansion slots and the cards installed in them appears on the screen. Remember to save a printout or written copy of the new information. If there are no resource conflicts, the configuration information is saved to a system configuration (.sci) file when you exit the utility. If there is a resource conflict, you must resolve it before completing the configuration. For more information, see "Resolving Resource Conflicts" found later in this chapter. The RCU lets you set a variety of system options through the .sci file. Through this file, you can notify the system of changes to your hardware and memory configuration, manage input/output (I/O) ports, and set other system operating parameters. Some of the categories do not offer options, but reflect installed hardware detected by the system. These items are displayed for your information only; you cannot change them through the utility. Using the Resource Configuration Utility 5-7