Dell PowerEdge 2300 User's Guide - Page 84
before
View all Dell PowerEdge 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
NOTE: Use the following procedure before an ISA expansion card is installed. See "When to Run the RCU" found earlier in this chapter for more detailed information. A list of expansion slots and the cards installed in them appears on the screen. If the utility asks for the option configuration diskette, insert the diskette that accompanied your expansion card. If the utility asks for the system configuration diskette, insert your RCU diskette. If the utility asks for the .cfg file library diskette, insert the diskette of .cfg files. The utility asks you to confirm your choice, and then it prompts you to select the expansion slot in which the card will be installed. If you are adding an ISA expansion card, insert your .cfg diskette to find the .cfg file for that card. If the .cfg file for the expansion card you are installing is not on the diskette, select Generic ISA Board from the list of configuration files. NOTE: Alternatively, if you know the resources used by the expansion card, you can press and bring up a menu that lets you create the .cfg file. For all ISA expansion cards, use the Step 4: Examine Switches or Print Report option (under the Steps in Configuring Your Computer menu) to check the switch and jumper settings on the new card. Configure the new card as indicated before it is installed in your computer. Remember to save a printout or written copy of your new configuration. The utility may prompt you to check the jumper and switch settings on the new card. Follow the online instructions to see an illustration of the new card's settings. Use the following procedure before an ISA expansion card is repositioned but after a PCI expansion card is repositioned. See "When to Run the Resource Configuration Utility" found earlier in this chapter for more detailed information. 5-6 Dell PowerEdge 2300 Systems User's Guide