Dell PowerEdge 2300 User's Guide - Page 58

Any error that occurs while the driver is initializing prevents it from loading. If an error does occur, the driver causes the computer to beep and then display a numbered error message: xxx message The xxx indicates the error code, and message is a descriptive line describing the error. The error codes are divided into three categories: 000-099 - Non-host-adapter specific 100-299 - Host-adapter specific 300-999 - Reserved Specific error codes, such as those in the following subsections, appear only if you have installed the host adapters and drivers that generate them. The following error codes alert you to error conditions caused by factors not related to the host adapter: 000 Failed ParseDriverParameters call A call to NetWare's ParseDriverParameters routine has failed for some unknown reason. The command-line contains errors, or you pressed at the port or slot prompt. 001 Unable to reserve hardware, possible conflict The driver failed in its attempt to reserve the host adapter's hardware settings (that is, direct memory access [DMA] and interrupt request [IRQ] settings). Another card in your system may be causing a conflict with the host adapter. 002 NetWare rejected card Failed AddDiskSystem call The driver failed in its attempt to register the host adapter with NetWare. The file server may not have enough memory. 003 Invalid command line option entered > option An invalid option was entered on the command line. The invalid option that was entered is also displayed. 004 Invalid command line, please enter correctly The driver was unable to understand the command line options you entered. Be sure you have entered these options correctly. The following error codes alert you to error conditions caused by factors related to the host adapter: 200 No host adapter found for this driver to register 3-22 Dell PowerEdge 2300 Systems User's Guide