Denon AVR 1909 Owners Manual - English - Page 33

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications ENGLISH Surround Speaker Select surround speakers use and size. [Selectable items] Large Small None Surround Back Speaker Select surround back speaker use and size. ( ) [Selectable items] Large Small None ( ) 2spkrs 1spkr NOTE Since "Amp Assign" of AVR-1909 is set to "ZONE2" by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the "Amp Assign" setting to "7.1ch" (vpage 35). Large : S elect this when using large speakers with ample low frequency reproduction capabilities. Small : S elect this when using small speakers without ample low frequency reproduction capabilities. None : S elect this when no speaker is connected. Yes : S elect this when a subwoofer is connected. No : S elect this when no subwoofer is connected. • Select "Large" or "Small" not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at "Crossover Frequency" (vpage 31). • When "Front Speaker" is set to "Small", "Subwoofer" can automatically set to "Yes". • If "Subwoofer" is set to "No", "Front Speaker" is automatically set to "Large". • If "Surround Speaker" is set to "None", "Surround Back Speaker" are automatically set to "None". • When "Front Speaker" is set to "Small", "Center Speaker" can not be set to "Large". • When using just one surround back speaker, connect it to the left channel (SBL). • When set to other than "7.1ch" with "Amp Assign", "Surround Back Speaker" is not displayed. s Subwoofer Setup Select low range signal to be reproduced by subwoofer. [Selectable items] LFE : P lay low range and LFE signal of channels set to "Small". LFE+Main : P lay low range and LFE signal of all channels. d Distance Set distance from listening position to speakers. Before making the settings, measure the distance from the listening position to the different speakers. Unit Select unit for distance. [Selectable items] Feet Meters Step Select step. (smallest distance) [Selectable items] 1ft 0.1ft : C an be selected when "Feet" is set. 0.1m 0.01m : C an be selected when "Meters" is set. Default Reset the settings to the default values. Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 2spkrs 1spkr : Select the number of surround back speakers. Even when the Surround Back Speaker setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make a menu "Parameter" - "Surround Parameter" - "SB CH Out" setting other than "OFF" (vpage 48). • This can be set when menu "Speaker Configuration" - "Subwoofer" is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. 0.0ft ~ 60.0ft : Display when "Feet" is set. 0.00m ~ 18.00m : Display when "Meters" is set. NOTE Set the distance between the listening position and the various speakers to no more than 20.0 ft (6.00 meters). For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22). 30