Denon AVR 1909 Owners Manual - English - Page 36

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications ENGLISH Audio Setup Make settings for audio playback. F Menu screen F 2.Manual Setup 1.Speaker Setup 2.HDMI Setup 3.Audio Setup 4.ZONE2 Setup 5.Option Setup 2-3.Audio Setup 1.EXT.IN SW Level 2.2ch Direct/Stereo 3.Dolby Digital Setup 4.Auto Surround Mode 5.EQ Preset a EXT. IN Subwoofer Level Set the subwoofer level for playback. [Selectable items] 0dB +5dB +10dB +15dB We recommend setting to "+15dB". s 2ch Direct/Stereo Make speaker settings for 2-channel mode playback. Setting To change the settings, select "Custom". [Selectable items] Basic : Use the same settings as in "Speaker Setup". Custom : Make separate settings for 2-channel mode. Front Select front speaker size. [Selectable items] Large Small : S elect front speaker size. Subwoofer Select subwoofer use. [Selectable items] Yes No : S elect subwoofer use. Subwoofer Mode Select low range signal to be reproduced by subwoofer. [Selectable items] LFE LFE+Main : S elect subwoofer signal. Crossover Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz : Select crossover frequency. d Dolby Digital Setup Set dynamic range for downmix playback of Dolby Digital sources. [Selectable items] ON : Compression is used. Select this if sound from front speakers is distorted. OFF : Do not use compression. This is the recommended setting. • Set this to "ON" if the sound from the front speakers seems distorted. • When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers. f Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. [Selectable items] ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surround mode does not change according to input signal. Distance FL Set distance from listening position to front left speaker. [Variable range] 0.0ft ~ 60.0ft Distance FR Set distance from listening position to front right speaker. [Variable range] 0.0ft ~ 60.0ft NOTE Set the distance between the listening position and the various speakers to no more than 20.0 ft (6.00 meters). • The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below. q Analog and PCM 2-channel signals w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.) • When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed. 33 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).