Denon AVR 1909 Owners Manual - English - Page 44

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications ENGLISH g Input Mode Make input mode and decode mode settings for this source. The selectable input modes depend on the input source and "Assign" setting (vpage 42). Input Mode Set the input mode for this source. [Input source] TUNER [Selectable items] Analog : Play only signals from analog input. EXT. IN : Play only signals from EXT. IN input. [Input source] XM [Selectable items] Auto : Automatically detect input signal and perform playback. EXT. IN : Play only signals from EXT. IN input. [Input source] CD CDR/TAPE DVD HDP TV/CBL VCR V.AUX SIRIUS [Selectable items] Auto : A utomatically detect input signal and perform playback. HDMI z1: Play only signals from HDMI input. (Excluding CD, CDR/ TAPE and SIRIUS) Digital z2 : P lay only signals from digital input. Analog : P lay only signals from analog input. EXT. IN : P lay only signals from EXT. IN input. z1: This can be selected for input sources for which the menu "Assign" setting is set to "HDMI In". z2: This can be selected for input sources for which the menu "Assign" setting is set to "Digital In" (vpage 42). • When a digital signal is properly input, the " " indicator lights on the display. If the " " indicator does not light, check the digital input connector assignment and the connections. • The surround mode cannot be set if the input mode is set to "EXT. IN". Operating from the main unit or main remote control unit Press INPUT MODE. Each time you press the button, the input mode display will change. z1 z2 Auto HDMI Digital EXT. IN Analog z1: This can be selected for input sources for which the menu "Assign" setting is set to "HDMI In". z2: This can be selected for input sources for which the menu "Assign" setting is set to "Digital In" (vpage 42). Decode Mode Set the decode mode for this source. [Input source] CD CDR/TAPE DVD HDP TV/CBL VCR V.AUX [Selectable items] Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This can be selected for input sources for which the menu "Assign" setting is set to "HDMI In" or "Digital In" (vpage 42). • Only set "PCM" and "DTS" when playing the respective signals. h Rename Change the display name for this source. Names containing up to 8 characters can be input. [Characters that can be input] A ~ Z a ~ z 0 ~ 9 space) Default Reset the settings to the default values. j Source Level Corrects the playback level of the selected input source's audio input. [Variable range] -12dB ~ 0dB ~ +12dB For input sources for which "HDMI In" and "Digital In" are set at the menu "Assign" setting, the analog input level and digital input level can be set separately. 41 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).