Denon AVR 1909 Owners Manual - English - Page 38

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications ENGLISH d Volume Limit Make a setting for maximum volume. Option Setup Make various other settings. s Volume Control Set the MAIN ZONE volume setting. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. f Power On Level Define the volume setting that is active when the power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. [Variable range] -70dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. g Mute Level Set the amount of attenuation when muting is on. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. F Menu screen F 2.Manual Setup 1.Speaker Setup 2.HDMI Setup 3.Audio Setup 4.ZONE2 Setup 5.Option Setup 2-5.Option Setup 1.Amp Assign 2.Vol.Control 3.Source Delete 4.On-Screen Display 5.Quick Select Name 6.Remote ID Setup 7.2Way Remote 8.Display 9.Setup Lock a Amp Assign Define how the amplifier for the surround back speaker channels is used. The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the MAIN ZONE) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections). [Selectable items] 7.1ch : The surround back channel is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. ZONE2 : When ZONE2 power is on, the ZONE2 channel is output from speakers connected to the SURR. BACK/AMP ASSIGN terminals. FrontA Bi-Amp : The Front A channel for Bi-Amp use is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. FrontB Bi-Amp : The Front B channel for Bi-Amp use is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. Power On Level This sets the volume set when the MAIN ZONE's power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. [Variable range] -80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. For details, see "Amp Assign / Multi-zone Connections and Operations" (vpage 69 ~ 72). 35 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).