Denon AVR 1909 Owners Manual - English - Page 87

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications GVideoH Symptom No picture appears. Picture cannot be recorded. DVDs cannot be copied on a VCR. On-screen display is not shown. Cause Countermeasure • The connections between the • Check the connections. AVR-1909 and monitor are faulty. • The monitor's input setting is • Set properly. wrong. • PURE DIRECT mode is set. • Cancel the PURE DIRECT mode. • The player is connected using the • High definition (1080i/720p) and component input connectors, the progressive (480p/576p) video monitor is connected using the signals are not down-converted. video (yellow) or S-Video output Set the player to interlace connectors. (480i/576i) signals. • Input source does not match • The video conversion function recorder's video connection does not work for the REC connector (video or S-Video). OUT connectors. Match the input source and recorder connections. • This is not a malfunction. Most - movie software includes copy prevention signals and cannot be copied. • When viewing HDMI or component video signals via the AVR-1909, the on-screen display appears when the MENU button on the main unit or the A.MENU button on the main remote control unit. • When only HDMI or component video signals are input to the AVR-1909, the characters of the on-screen display are not displayed over the picture. • The operation content display is • Set "Manual Setup" - "Option "OFF". Setup" - "On-Screen Display" - "Text" to "ON". • The main volume display is • Set "Manual Setup" - "Option "OFF". Setup" - "On-Screen Display" - "Master Volume" to "ON". • The display during tuner operation • Set when "Manual Setup" is "OFF". - "On-Screen Display" - "Tuner Information"is not "OFF". • The display during iPod operation • Set when "Manual Setup" is "OFF". - "On-Screen Display" - " iPod Information" is not "OFF". Page 12 ~ 16 - 46 - 15 - 9 9 36 36 36 36 GHDMIH Symptom HDMI audio signals are not output from speakers. Cause Countermeasure • The "Manual Setup" - "HDMI • Set to "Amp" Setup" - "HDMI Audio Out" setting is set to"TV" ENGLISH Page 32 No picture • The connections to the HDMI • Check the connections. 12 appears connectors are faulty. with HDMI • HDMI input setting is improper. • Check the HDMI input setting. 42 connections. • The monitor is not compatible • Connect a monitor that is 12 with copyright protection compatible with copyright (HDCP). protection (HDCP). • The HDMI format of the player • Match the HDMI format of the 12 and monitor do not match. player and monitor. No sound is • The "Manual Setup" - "HDMI • Set to "TV". 32 output from Setup" - "HDMI Audio Out" the monitor setting is set to "Amp". connected with HDMI connections. When performing • H DMI's CEC function is • Set "Manual Setup" - "HDMI 32 the following operating. Setup" -- "HDMI Control" to operations on a "OFF". connected device, When you only want to operate AVR-1909 has the the power on/off each device, set same operations. "Power Off Control" to "OFF". ⋅ Power ON/OFF ⋅ S witching audio output devices ⋅ A djust volume ⋅ S witch input source 84