Denon AVR5700 Owners Manual - Page 22
Setting the channel level - avr 5700 reset
UPC - 081757503778
View all Denon AVR5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
7 ENTER Enter the setting. The System Setup Menu reappears. The AVR-5700 automatically sets the optimum surround delay time for the listening room. NOTE: • If the distance unit is changed after the delay time is set, the settings are reset to the factory default values (see page 16). Setting the channel level • Use this setting to adjust so that the playback level between the different channels is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit. (For details, see page 43.) • When using both surround speakers A and B, their playback levels can be adjusted separately. 1 At the System Setup Menu select "Channel Level". 2 Switch to the Channel Level screen. ENTER 3 4 5 22 Select "Test Tone Mode". Select the mode. Select "Auto" or "Manual". • Auto: Adjust the level while listening to the test tones produced automatically from the different speakers. • Manual: Select the speaker from which you want to produce the test tone to adjust the level. Example: When the "Auto" mode is selected Select "Surr. Sp.", then select the surround speaker(s) from which you want to produce the test tone (A, B or A+B). • Surr. Sp.: A Adjusts the balance of the playback level between the channels when using surround speaker A. • Surr. Sp.: B Adjusts the balance of the playback level between the channels when using surround speaker B. • Surr. Sp.: A+B Adjusts the balance of the playback level between the channels when using surround speakers A and B at the same time. 2 The "Surr. Sp." can only be selected when both surround speakers A and B have been selected at the System Setup Menu (when both A and B have been set to "Large" or