Dewalt DCW100K Instruction Manual - Page 11

English Parameter Description Range Unit Break voltage (Uco) 25 - 80 Volt Used to specify at which arc length the welding process is completed. The welding voltage increases as the length of the arc increases. The arc is extinguished when it reaches the voltage specified here. Factory setting: 45 volts Software version (SOF) The full version number of the currently installed software is contained in a number of displays and can be retrieved by turning the adjusting dial. Automatic switch-off (tSd) If the device is not used or operated for a specified period of time, it switches off automatically. Factory setting: 900 seconds. 300- 900 Seconds Factory setting (FAC) no This can be used to reset the YES device to its factory settings. ALL - Cancel reset - Reset the parameters for the selected welding process to their factory settings - Reset the parameters for all welding processes to their factory settings Resetting of the selected value to its factory setting must be confirmed by pressing the adjusting dial. Parameter Parameters for TIG Welding Description Range Unit Comfort Stop Sensitivity (CSS) 0.3 - 2.0 Volt This parameter is only available when the tri parameter is set to OFF. Factory setting: 2.0 Break voltage (Uco) 12 - 35 Volt Used to specify at which arc length the welding process is completed. The welding voltage increases as the length of the arc increases. The arc is extinguished when it reaches the voltage specified here. Factory setting: 15 volts Software version (SOF) The full version number of the currently installed software is contained in a number of displays and can be retrieved by turning the adjusting dial. Automatic switch-off (tSd) If the device is not used or operated for a specified period of time, it switches off automatically. Factory setting: 900 seconds. 300- 900 Seconds 11