Dymo LabelManager® Wireless PnP User Guide 1 - Page 19

Caring for the Label Maker Your label maker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your label maker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette. To clean the cutter blade 1 Press and then pull outward to open the side cover of the label maker. 2 Remove the label cassette. Cutter blade 3 Press and hold the power button. 4 While holding the power button, press and release the cutter button to move the cutter blade. 5 Repeat step 3 until the cutter blade is exposed. See Figure 6. Figure 6 6 Release the power button. 7 Use a cotton ball and alcohol to clean both sides of the blade. The cutter blade is extremely sharp. Use caution when cleaning. 8 After cleaning the blade, press and release the cutter button to return the cutter blade to the home position. To clean the print head 1 Press and then pull outward to open the side cover of the label maker. Print head Cleaning tool 2 Remove the label cassette. 3 Use a small, soft brush or cotton swab to wipe away dust and other stray particles from the inside of the label compartment. 4 Remove the cleaning tool from inside the label compartment cover. 5 Gently wipe the padded side of the tool across the print head. See Figure 7. The print head is very delicate, so use care when cleaning. 6 Replace the cleaning tool, insert the label cassette, and close the side cover. Figure 7 19 LabelManager® Wireless PnP User Guide