Dynex DX-wegrtr User Manual (English) - Page 45
My Network Neighborhood
UPC - 600603114403
View all Dynex DX-wegrtr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting up your wireless router 45 6 If not already selected, select Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. Your network adapter(s) are now configured for use with the router. To manually configure network adapters in Windows 98SE or Me: 1 Right-click My Network Neighborhood, then select Properties from the list. 2 Select TCP/IP, then settings for your installed network adapter. You will see the following window. 3 If Specify an IP address is selected, your router will need to be set up for a static IP connection type. Write down the address information. You will need to enter this information into the router. • Write in the IP address and subnet mask from the IP Address tab. • Click the Gateway tab. Write the gateway address down in the chart. • Click the DNS Configuration tab. Write the DNS address(es) in the chart. 4 If not already selected, click Obtain IP address automatically in the IP Address tab, then click OK. 5 Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the router. Set up the computer that is connected to the cable or DSL modem FIRST using these steps. You can also use these steps to add computers to your router after the router has been set up to connect to the Internet. To manually configure network adapters in Mac OS X: 1 Click the System Preferences icon. The System Preferences menu opens.