Dynex DX-wegrtr User Manual (English) - Page 58

58 Legal notices What's the difference between 802.11b, 802.11g, 802.11a, and 802.11n? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation for certifying network standards. The most common wireless networking standard, 802.11b, transmits information at 11 Mbps; 802.11a and 802.11g work at 54 Mbps; and Pre-N works at 108 Mbps. 802.11n has speeds that exceed 802.11g, and up to twice the wireless coverage area. See the following chart for more detailed information. Wireless Technology 802.11b 802.11g 802.11a 802.11n Speed 11Mbps 54Mbps 54Mbps 600% faster than standard 802.11g* Frequency Common household Common household devices such as devices such as cordless phones and cordless phones and microwave ovens may microwave ovens interfere with the may interfere with unlicensed band the unlicensed band 2.4GHz 2.4GHz 5GHz- uncrowded band Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatibility Compatible with 802.11g Compatible with 802.11b Incompatible with Compatible with 802.11b or 802.11g 802.11g or 802.11b Depends on Depends on Interference range is Up to 800% wider Coverage* interference-typically interference-typicall typically 50-100 ft. coverage than 100-200 ft. indoors y 100-200 ft. indoors standard 802.11g* Mature-legacy Advantage technology Common-widesprea Less interference- Leading edge- best d use for Internet great for multimedia coverage and sharing application throughput *Distance and connection speeds will vary depending on your networking environment. Legal notices FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, the Dynex Corporation, of 7601 Penn Avenue South, Richfield, Minnesota, U.S.A., declare under our sole responsibility that the product, DX-WEGRTR, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.