EMC CX600 Configuration Guide - Page 148

February 3, 2003 EMC CLARiiON Open Systems Configuration Guide Revision 8 Effective Date January 7, 2002 7 December 3, 2001 6 November 15, 2001 Changes Adds the following drawing to the Mixing Configurations section: Example of a Solaris Server in Both SAN and DIrect Attach Configurations. Revises the paths information and adds support for 8 paths from an HP-UX server to an FC4700 storage system (page 9 Adds CDE or ATF as a software requirement to the Access Logix Configuration Rules ()page 12 Adds support for Microsoft Cluster Server for Windows 2000 and Windows NT servers connected to an FC5300 in a SAN configuration. Adds support for a single-server single-fabric connection to multiple storage systems in the single fabric connection tables for all operating systems, and adds the following new configuration drawing: Single Fabric - Single Host and Multiple Storage Systems (FC4500, FC4700, FC5300) (configuration 1) Combined the following three configuration drawings from the previous revision into one drawing: Dual Fabric - Multiple HBAs (configuration 5), Dual Fabric - Mixed Multiple and Single HBA (FC4700) (configuration 6), and Dual Fabric - Mixed Multiple HBA (4700) (configuration 7). The new drawing is Dual Fabric - Mixed Multiple and Single HBAs (FC4500, FC4700, FC5300) (configuration 6) Removes the configuration 11 because it is unnecessary: Direct Remote Mirror - Fabric Servers Multiple/Single HBAs and Optional Extenders (FC4700). Adds support for direct optical connection to FC5300 to the direct connection tables for all operating systems except IRIX, and to the following configuration drawings: - Single Server - Dual HBA (FC4500, FC4700, FC5300, FC5500, FC5700) (configuration 11 on page 63) - Dual Server Direct - Single HBA (Split-Bus) (FC4500, FC4700, FC5300, FC5500, FC5700) (configuration 13 on page 64) - Dual Server Direct - Dual HBA/Dual Ports Per SP (FC4500, FC4700, FC5300) (Configuration 14 on page 65) Adds the FC5300 to and removes single mode cables from the Devices and Connectors table (page 74). Adds the information from the EMC CLARiiON Switch Topology Rules P/N 0850090540-A08 and obsoletes the topology rules document: - Switch and fibre connectivity information to Storage Area NetWork (SAN) Configuration Rules (page 7) - Switch Topology Rules section (page 12) - Following configurations: - Sample DS-16B Switch Configurations (configuration 21) - Typical Fan-out Configuration Using Two 16-Port Switches (configuration 22) - Switch Zoning section (page 76) Adds support for NetWare CDE and/or ATF to all the NetWare configuration tables (pages 32 through 35) and to all configuration drawings except configuration 16 Dual Server Direct - Single HBA (Split-Bus). Adds support for multi-path NetWare servers to the "Multi-path Support (FC4700 only)" information (page 8) and to the following NetWare configuration tables and configuration drawings: - NetWare Single Fabric Connections - NetWare Dual Fabric Connections - NetWare Switch Remote Mirror and Fabric Server Connections - NetWare Direct Remote Mirror with Fabric Server Connections - NetWare Direct Connections - Single Fabric - QuickLoop and Fabric/Multiple HBA/Dual Ports per SP (FC4700) (configuration 4) - Dual Fabric - Multiple HBA (configuration 6 on page 57) - Dual Fabric - Mixed Multiple and Single HBA (FC4700) (configuration 7) - Dual Fabric - Mixed Multiple HBA (FC4700) (configuration 8) - Single Fabric Remote MIrror - Fabric Servers (FC4700) (configuration 9) - Dual Fabric Remote Mirror - Fabric Servers (FC4700) (configuration 10) - Direct Remote Mirror - Fabric Servers and Optional Extenders (FC4700) (configuration 11) - Direct Remote Mirror - Fabric Servers Multiple/Single HBAs and Optional Extenders (FC4700) (configuration 12) - Single Server - Quad HBA/Dual Port Per SP (FC4700) Single Server (configuration 15). Adds support for the FC5300 in SAN configurations (requires Access Logix, which is available from selected channels). Document Rev 19 Page 148 EMC Confidential