EMC CX600 Configuration Guide - Page 64
Solaris IP Remote Mirror with Fabric Server Connections
View all EMC CX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
February 3, 2003 EMC CLARiiON Open Systems Configuration Guide Solaris IP Remote Mirror with Fabric Server Connections See General Configuration Rules (page 6) and Switch Topology Rules (page 20). Servers: Multiple with same or different operating systems. See Fan-Out Rule (page 9), Paths from a Server to an SP (page 10), Clustered Server Configuration Rules (page 14), Failover Configuration Rules (page 15). Storage Systems: 2 CX400, CX600, or FC4700 for remote mirroring. 1 per site per mirror configuration. For the failover software supported for a storage system, see Failover Configuration Rules (page 15). Server Connection: 1 to 2 local and remote fabrics. See Storage Area Network (SAN) Configuration Rules (page 9), Port Speed Rules (page 14), and General Switch Topology Rules (page 20). Mirror Connection: SP port 3 (CX600) or SP port 1 (CX400, FC4700) for dedicated point-to-point mirroring. 2 or 4 FC-to-IP devices required for Fibre Channel to IP network connection. Configurations: Storage Systems CX400 CX600 FC4700 Servers Multiple per site HBA ports per Server PowerPath, DMP multiple ATF - 1 or 2 Utility Kit PowerPath, CDE - 1 Ports Used per SP PowerPath, DMP multiple Utility Kit PowerPath, ATF, CDE - 1 Requirements/Comments PowerPath, Utility Kit PowerPath, DMP, ATF, or CDE. Clusters optional - SunCluster only if not using DMP, Veritas Cluster Server. Access Logix, MirrorView, optional SnapView. Diagrams 11 on page 104 12 on page 106 Document Rev 19 Page 64 EMC Confidential