Edimax EW-7428HCn Manual - Page 22
MacOS and Linux, IV-1. Configuring, your IP Address, access point, III-6-1., Administrator, admin
View all Edimax EW-7428HCn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
For Mac users, enter the default IP address (http://192.168.2.2) into your browser's address bar. (MacOS and Linux) Note: The access point uses the default IP address 192.168.2.2, which may not be in the same IP address subnet of your network. Accordingly, you may need to modify the IP address of your PC or Macintosh to 192.168.2.10, before you can access the browser-based configuration interface. In the event that you cannot access the browser-based configuration interface using either the access key or the default IP address, please refer to IV-1. Configuring your IP Address for guidance on how to modify your IP address. Note: For guidance on how to assign a new IP address to the access point, so that it is within the same IP address subnet of your network, please refer to III-6-1. Administrator. If the default IP of the access point remains unchanged, you may need to repeat this process and modify the IP of your PC or Macintosh every time you wish to configure the access point. You will be prompted to enter the device's username and password. The default username is admin and the default password is 1234. 22