Edimax EW-7428HCn Manual - Page 35
III-3-3. AP Bridge-Point to Point Mode
View all Edimax EW-7428HCn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
its SSID, in which case you will need to manually enter the SSID in the "MAIN SSID" field on the previous page. III-3-3. AP Bridge-Point to Point Mode In this mode, the access point connects to another wireless access point in the same mode, and all connected Ethernet clients of both devices will be connected together. This allows two physically isolated networks to communicate with each other. Note: When you set the device to this mode, it will not accept regular wireless clients any more. Band Channel Please select the wireless band you wish to use. By selecting different band settings, you'll be able to allow or deny access points using certain bands. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only access points using the wireless band you select (802.11b, 802.11n, or 802.11g) will be able to connect to this device. If you select 2.4GHz (B+G), then only access points using the 802.11b and 802.11g bands will be able to connect to this device. If you want to allow 802.11b, 802.11g, and 802.11n access points to connect to this device, select 2.4GHz (B+G+N). Please select the channel number you wish 35