Edimax EW-7428HCn Manual - Page 6
Back Panel - reset
View all Edimax EW-7428HCn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Flashing On (2)Wi-Fi (3)LAN Flashing On Off Flashing Device is resetting to factory default settings. WPS is activated and the device is waiting for a WPS signal from another device. Wi-Fi activity (transferring data). Connected to a local area network. Not connected to a local area network. LAN activity (transferring data). Item Function (4)Reset/ WPS WPS Reset Description Press and hold this button for 2 seconds to activate WPS mode, during which this device will attempt to automatically connect to a WPS-enabled client device. To reset the device to factory default settings, press and hold the button for 10 seconds, until the Power LED starts flashing. Release the button to initiate reset procedures. Note: Please note that the hardware WPS button only works when connecting to wireless clients. It will have no effect when the device itself is in Wireless Client Mode. I-4. Back Panel Item Name (5) LAN Port (6) 5V DC Description Connects to an Ethernet cable. This device is capable of Power over Ethernet (PoE), so if the cable is connected to a PoE switch, then this device will be powered by the Ethernet cable alone. Connects to the power adapter. Note: Please do not connect the power adapter if the device is already connected to a PoE switch via the LAN port. 6