Edimax EW-7428HCn Manual - Page 42
SSID Isolation
View all Edimax EW-7428HCn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Band kinds of data, to give higher priority to applications which require instant responses. This improves the performance of such network applications. Please select the wireless band you wish to use. By selecting different band settings, you'll be able to allow or deny wireless clients using certain bands. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11n, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using the 802.11b and 802.11g bands will be able to connect to this access point. AP Isolation SSID Isolation If you want to allow 802.11b, 802.11g, and 802.11n clients to connect to this access point, select 2.4GHz (B+G+N). When this is set to "Enabled", wireless clients connected to this device will be able to access the Internet, but will not be able to communicate with each other. This applies to clients connected to the specified ESSID only. When the access point uses multiple SSIDs and this is set to "Enabled", then wireless clients connected to the same SSID will be able to communicate with each other, but will not be able to communicate with other wireless clients connected to another of this access point's SSIDs. You can input a numeric VLAD ID value between 1 - 4094 for each specific ESSID. Click "APPLY" to make changes take effect. The following message will appear: 42