Edimax EW-7428HCn Manual - Page 29
If you select 2.4GHz B, 2.4GHz N, or
View all Edimax EW-7428HCn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Band Please select the wireless band you wish to use. By selecting different band settings, you'll be able to allow or deny wireless clients using certain bands. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11n, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using the 802.11b and 802.11g bands will be able to connect to this access point. MAIN ESSID Multiple ESSID AP Isolation SSID Isolation If you want to allow 802.11b, 802.11g, and 802.11n clients to connect to this access point, select 2.4GHz (B+G+N). Please input the ESSID (the name used to identify this wireless access point) here. You can input up to 32 alphanumerical characters. Please note that the ESSID is case sensitive. When you press this button, a new window will appear, allowing you to assign up to four ESSIDs to this access point. Please see the following page for more details. When this is set to "Enabled", wireless clients connected to this device will be able to access the Internet, but will not be able to communicate with each other. This applies to clients connected to the MAIN ESSID only. When the access point uses multiple SSIDs and this is set to "Enabled", then wireless clients connected to the same SSID will be able to communicate with each other, but will not be able to communicate with other wireless clients connected to another of this 29