Home > Edimax Manuals > Webcams > Edimax IC-7110W > Manual Viewer

Edimax IC-7110W Manual

Edimax IC-7110W Manual

Edimax IC-7110W manual table of contents:

  • Edimax IC-7110W | Manual - Page 1
    IC-7110 / IC-7110W / IC-7110P User Manual 10-2011 / v1.0
  • Edimax IC-7110W | Manual - Page 2
    ...magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co.,...dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential.... The product you have purchased and the setup screen may appear slightly different...
  • Edimax IC-7110W | Manual - Page 3
    ... 1.2 Introduction ...6 1.3 Product Features ...7 1.4 Key Components ...8 1.5 Camera Installation ...16 1.6 Locating the IP Address of this Network Camera...19 ... ...40 2.2.2 MPEG4 ...41 2.2.3 H.264 ...42 2.2.4 OSD ...43 2.2.5 Night Vision ...44 2.3 Pan and Tilt ...45 2.3.1 Preset Points ...45 2.3.2 ...
  • Edimax IC-7110W | Manual - Page 4
    ...89 Chapter III: Using the Surveillance Software...90 3.1 Installing network Camera Surveillance Software ...90 3.2 Using network camera surveillance software ...... 4.1 iPhone App Installation ...129 4.2 Android App installation ...141 4.3 Web browser installation ...158 Chapter V: Appendix ...164 5.1 ...
  • Edimax IC-7110W | Manual - Page 5
    5.2 How to apply for a free DNS account at http://www.dyndns.org ...165 5.3 Troubleshooting ...168 4
  • Edimax IC-7110W | Manual - Page 6
    ... return the package to claim for missing contents. 1 2 3 4 5 6 7 8 Item Name Network Camera Antenna(IC-7110W only) Power Adapter Ethernet Cable CD ROM (Including Manual/Utility/Multi-Language QIG) Accessory kit Quick Installation Guide Mounting Kit Quantity ...
  • Edimax IC-7110W | Manual - Page 7
    ... view the Network camera's video from anywhere on your local computers or via the Internet. Besides, Edimax IC-7110 series features...some places which will not be covered by camera, but this problem is completely solved by this Network camera. With built-in pan-tilt function, you can point the camera ...
  • Edimax IC-7110W | Manual - Page 8
    ...-controlled IR LEDs. Wired and wireless network (IC-7110W only, 802.11b / 802.11g / 802.11n) support Wireless data encryption (WEP / WPA) Supports DHCP and PPPoE protocol, you can also assign a fixed IP address to the camera also. Supports Dynamic DNS (used to allocate the network cameraମ.
  • Edimax IC-7110W | Manual - Page 9
    ... Ring IR LED Microphone Wired & Wireless: POE model: Item Power/Cloud Audio Power LED Power ... will flash and light up when the camera is powered on and ready for access to Cloud. Indicates Audio status When ... a wired network. The LED will flash while data is transmitted. LAN ACT (IC-7110P only) 8
  • Edimax IC-7110W | Manual - Page 10
    Wireless When the Network Camera is linked to a wireless network, this LED will light up. The LED will flash while video is (IC-7110W only) transmitted or received through a wireless ... You can change the aim and focus of the camera by adjusting the camera head's aim and adjusting the ...
  • Edimax IC-7110W | Manual - Page 11
    Back View IC-7110: USB Port Audio Connector Power Connector Ethernet Port SD Card Slot 10
  • Edimax IC-7110W | Manual - Page 12
    IC-7110W: Antenna Base Ethernet Port Audio Connector Power Connector WPS Button SD Card Slot 11
  • Edimax IC-7110W | Manual - Page 13
    ... SD Card Slot Item Power Connector SD Card Slot USB Port* (IC-7110 only) Audio Connector Ethernet Connector Description Audio Connector Connects ... card for image / video storage Accepts USB WiFi adapter** to enable wireless Connects to external speaker for audio output Connect to your local area ...
  • Edimax IC-7110W | Manual - Page 14
    Antenna Base (IC-7110W only) WPS Button (IC-7110W only) Connects to supplied antenna Press the WPS button (click) on the Network Cam and click on the Access Point that you want to wirelessly connect it to. Note: The USB port only works with Edimax USB WiFi adapters. Note: Edimax EW-7711HPn, EW-...
  • Edimax IC-7110W | Manual - Page 15
    Side View Reset Button Item Reset Button Description Press the button with pen nib and hold for 5 seconds to reset the camera settings to factory default value. 14
  • Edimax IC-7110W | Manual - Page 16
    Bottom View Tripod Connector Item Tripod Connect or Description Connects to tripod to secure the camera when the camera is not put on a horizontal surface. 15
  • Edimax IC-7110W | Manual - Page 17
    1.5 Camera Installation Please follow the following instructions to set your network camera up. 1. Unpack the product package and check if anything‟s missing. 2. Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this network camera. 16
  • Edimax IC-7110W | Manual - Page 18
    3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the bottom of the network camera. 4. Connect two antennas to the antenna bases, which is located at the back of this network camera. 17
  • Edimax IC-7110W | Manual - Page 19
    ... the place you wish to monitor. If you wish to hang the camera on the ceiling or wall, please use the tripod connector (located at ... of the camera) to secure the camera. 6. Launch Internet Explorer on your computer, and following the instructions given in next section to set the network camera. 18
  • Edimax IC-7110W | Manual - Page 20
    ... wish to assign another IP address to this network camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your computer is not 192.168.2, you ‟ll have to change the IP address of your computer first: 1. Click „Start‟ ...
  • Edimax IC-7110W | Manual - Page 21
    2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟. 20
  • Edimax IC-7110W | Manual - Page 22
    4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟. 21
  • Edimax IC-7110W | Manual - Page 23
    ... camera, to clear all settings of the network camera and reset the IP address back to 192.168... You‟ll lose all settings in the network camera. b. Ask network administrator to check the DHCP release ... DHCP release table on DHCP server when the network camera is connected to the local area network. 22
  • Edimax IC-7110W | Manual - Page 24
    ... Locate the Camera If you can‟t connect to the camera by the instructions given in last chapter, you can use camera admin...network. The admin software is also capable to locate multiple cameras on your local area network. Please insert the user manual CD-ROM supplied in the product package, and the ...
  • Edimax IC-7110W | Manual - Page 25
    ... list all Ediamx network cameras found on local network, with their IP address and MAC address: You can click icon to find network cameras on local network again, or Icon to configure it (see next step). select an network camera and click To preview the image of network camera, please...
  • Edimax IC-7110W | Manual - Page 26
    3. Ediview finder will inspect network camera‟s connection type and if it‟s connected to Internet, this may take a few seconds, please be patient. 25
  • Edimax IC-7110W | Manual - Page 27
    ...message will tell you if your network camera is connected to Internet (connected to the cloud), and the connection type (wired or wireless). When you see... Name: Input network camera‟s name used to identify this network camera. Password: Input new password Confirm: Input new password...
  • Edimax IC-7110W | Manual - Page 28
    ...area network will be displayed. To preview the image of network camera, please click the icon indicated by white ...displayed here. If you wish to connect to certain camera by web browser, double-click... several functions: Language change: This camera finder utility supports 3 languages: English, Chinese...
  • Edimax IC-7110W | Manual - Page 29
    Search camera: Click this button to search all cameras on local area network again. Configure camera: Click this button to configure camera‟s network and security setting. You‟ll be prompted to input camera‟s password: 28
  • Edimax IC-7110W | Manual - Page 30
    ... page, you can configure camera‟s network settings. Select „DHCP‟ to set the camera to obtain an IP address from DHCP server on local area network automatically, and select „Manual IP‟ to input the IP address information manually. Click „OK‟ to save ...
  • Edimax IC-7110W | Manual - Page 31
    ... Logging in the Management Interface Make sure the network camera is correctly powered (Power LED is on), and then... Explorer and type the IP address of the network camera in address bar of Internet Explorer. You ...try to obtain the correct user name / password, or you‟ll have to reset the camera. 30
  • Edimax IC-7110W | Manual - Page 32
    If this is the first time you log onto web management interface, you ‟ll be prompted to install ActiveX Plugin: When you see this message, please click...„OK‟, and click „Download the latest ActiveX‟ link to download plugin so you can use this camera: Click „Run‟ to download plugin: 31
  • Edimax IC-7110W | Manual - Page 33
    Click „Run‟ to install plugin: Please click „Next‟ button to start installation (click „Next‟ or „Install‟ when you‟re prompted, until installation is complete). 32
  • Edimax IC-7110W | Manual - Page 34
    Click „Finish‟ to complete plugin installation. Now you can go back to web browser, and you should be able to see the image captured by camera (You may need to press F5 or CTRL-R to reload web page). 33
  • Edimax IC-7110W | Manual - Page 35
    ...or both): OR Your computer may not have the display capability that this network camera requires, or you don't have Microsoft DirectX® installed. Please download ...again. In some cases, your computer is able to display the image from network camera correctly, but you'll still see these messages. If ...
  • Edimax IC-7110W | Manual - Page 36
    Chapter II: Using the Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and this is the only menu you can see the real-time image from camera. You can always back to this menu by clicking „...
  • Edimax IC-7110W | Manual - Page 37
    ...moving speed when you use pan / tilt function to point the camera to a new direction. Available options are 1 (fastest) to 5 (slowest). Select 1 to move the camera by a faster speed, but you will not ... Type Frequency If the place where this network camera points to has a (or more) fluorescent light...
  • Edimax IC-7110W | Manual - Page 38
    Pan / Tilt Control Moves camera to a new direction. Press one of 8 directional buttons to ... point instantly. See next chapter for detail instructions of how to set preset points. Press „C‟ ... Please note that external speaker must be connected to this camera. If you wish to enlarge certain portion...
  • Edimax IC-7110W | Manual - Page 39
    ... green square) to reposition the zoom area. Fit to Window Size Click this button and the image size will be adjusted to fit the size of browser window. Click this button to display the image in full-screen mode (uses all available space to display the image captured by this camera). Full Screen 38
  • Edimax IC-7110W | Manual - Page 40
    ... this network camera in „Video‟ menu. You can access this menu by clicking „Video‟ on the top of web management interface. There are 5 types of video settings for this network camera. To set the option of a certain video setting, put mouse...
  • Edimax IC-7110W | Manual - Page 41
    ... Available options from „30‟ to „1‟, indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video... requires more network bandwidth. If you‟re using this video camera with insufficient network bandwidth, selecting a lower frame rate setting ...
  • Edimax IC-7110W | Manual - Page 42
    ... Available options from „30‟ to „1‟, indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video... requires more network bandwidth. If you‟re using this video camera with insufficient network bandwidth, selecting a lower frame rate setting ...
  • Edimax IC-7110W | Manual - Page 43
    ... Available options from „30‟ to „1‟, indicates how many video frames this camera will transmit every second. Higher frame rate provides smooth video... requires more network bandwidth. If you‟re using this video camera with insufficient network bandwidth, selecting a lower frame rate setting ...
  • Edimax IC-7110W | Manual - Page 44
    ... OSD If you need to display information about this camera, like camera‟s name or current date ...€Ÿ to enable on-screen display function (information about this camera will be displayed on camera‟s display image), and ... image, select „Disable‟ to hide it. Show Camera Name Show Date Show Time...
  • Edimax IC-7110W | Manual - Page 45
    2.2.5 Night Vision This camera equips with 9 IR LEDs to enhance video quality in the night. You can enable or disable IR LEDs by „Night..., even it‟s very dark. Turn IR LEDs on, even it‟s very bright. Let camera decide to switch LED lights on or off automatically: LEDs will light up when it‟s ...
  • Edimax IC-7110W | Manual - Page 46
    ...can access this menu by clicking „PTZ‟ on the top of web management interface. 2.3.1 Preset Points You ...provides 9 memory slots; follow the following instructions to move the camera and set a new preset ...) on the image to move the camera to the direction. You may need to set the Pan / Tilt speed ...
  • Edimax IC-7110W | Manual - Page 47
    3. When you move the camera to the position you want, type a name in „Position name‟ field, and click „Set to Point n‟... recall the position from „Camera‟ menu (click the position number button), and the camera will move to preset position instantly. If you want to remove a preset position...
  • Edimax IC-7110W | Manual - Page 48
    2.3.2 Guard Tour You can make the camera move between many pre-defined positions, and define the time you wish to pause ... below: Item Add Edit Start / Stop Description Add a new set of guard tour (see instructions below) Edit a selected guard tour. The parameters for an existing guard tour will be ...
  • Edimax IC-7110W | Manual - Page 49
    The descriptions of every setting in this menu will be given below: Item Name Description Input the name of this set of guard tour here. As you may have many sets of guard tour, please give it a meaningful name so you can remember the main purpose of this set. Do not visit all positions in this ...
  • Edimax IC-7110W | Manual - Page 50
    View Time: Define the time you wish the camera to stop at this position in seconds. View Order: Give this position a number greater than 1 and not the same with other positions, and guard tour will start visiting positions by order (from 1 to last number, and then start from 1 again). Remove: Remove...
  • Edimax IC-7110W | Manual - Page 51
    ...in this menu, and you have to specify TCP/IP parameters in this menu if you want to change .... You can access this menu by clicking „LAN‟ on the top of web management interface. After you selected „Network‟, ... the network setting you wish to set, and then refer to instructions given below: 50
  • Edimax IC-7110W | Manual - Page 52
    2.4.1 LAN You can define IP address and select the port number you wish to use here. 51
  • Edimax IC-7110W | Manual - Page 53
    ... server here. When primary DNS is unreachable, network camera will use the IP address specified here as DNS server. This field is optional. Secondary DNS Web Port Specify the port number of ...10.20.20.30:90' in the address bar of Internet explorer. Enable PPPoE User Name Password ...
  • Edimax IC-7110W | Manual - Page 54
    most of ISPs and will give you a nice network performance. Click „Apply‟ to save settings and make the new settings take effect. 53
  • Edimax IC-7110W | Manual - Page 55
    ... function of this network camera, select „Disable‟ to disable it. Select the network type of wireless connection. Available options are „Infrastructure‟ (Connect the network camera to a wireless access point), and „Adhoc‟ (This network camera will ...
  • Edimax IC-7110W | Manual - Page 56
    ... Networks Here shows all wireless access points found by this network camera. Please note not ... hides it‟s SSID, you can use MAC address to distinguish them. Signal: Shows the ... strength in percent. Channel: Shows the radio channel of this wireless access point. Encryption: Shows the encryption type...
  • Edimax IC-7110W | Manual - Page 57
    ... radio channel is auto-selected according to the channel that wireless access point uses. You can ... select the channel number when network type is „Adhoc‟. Wireless Key Input the encryption key of selected ... WPS connection. Click this button and this camera will enter PBC-style WPS connection ...
  • Edimax IC-7110W | Manual - Page 58
    ... does not give you a fixed Internet IP address (i.e. the Internet address you‟re using... dyndns.org (http://www.dyndns.org). Detailed instructions of how to apply a new account can be found ... DNS function of this network camera, select „Disable‟ to disable it. Select dynamic DNS service provider ...
  • Edimax IC-7110W | Manual - Page 59
    ... function is useful and you don‟t have to remember the IP address of this network camera. Simply open „Network neighbor ‟ and ... Enable UPnP Description Select „Enable‟ to activate UPnP function of this network camera, select „Disable‟ to disable it. Click „Apply‟ to save settings ...
  • Edimax IC-7110W | Manual - Page 60
    Click the message to open „My Network Places‟, and you‟ll see the network camera: You can double-click the icon to launch Internet Explorer and log onto network camera‟s web management interface directly. 59
  • Edimax IC-7110W | Manual - Page 61
    ... by this camera, or integrate the image with your own web application, you can use this function: Input the filename ... users can access the image by this filename with .jpg extension with the camera ‟s IP address as prefix. For example, if your camera‟s IP address is „192.168.2.1‟ and the ...
  • Edimax IC-7110W | Manual - Page 62
    2.4.6 RTSP If you want to watch video captured by this network camera by your own RTSP (Real Time Streaming Protocol) media player, you can use this function to setup RTSP parameters, so your RTSP-compatible player will be able to receive video data. ...
  • Edimax IC-7110W | Manual - Page 63
    MPEG4 RTSP Path H.264 RTSP Path Input the path of MPEG4 RTSP video file. When you use RTSP-compatible media player to play RTSP stream, please remember to add „.sdp‟ file extension. Input the path of H.264 RTSP video file. When you use RTSP-compatible media player to play RTSP stream, please ...
  • Edimax IC-7110W | Manual - Page 64
    2.5 Motion Detection When you wish to use this camera to monitor the activities, motion detection function will be very useful. Camera will ...image, and take a snapshot when motion is detected. So you can use this camera to keep the safety of the belongings you have. To use motion detection, click the...
  • Edimax IC-7110W | Manual - Page 65
    2.5.1 Motion Detection You can use this menu to setup basic motion detection settings: The descriptions of every setting in this menu .... Select the time interval between two motions from dropdown menu. When a motion is detected, camera will not detect any motion again within the time interval you ...
  • Edimax IC-7110W | Manual - Page 66
    Recording Time Select the duration you wish this camera to record image when a motion is detected from dropdown menu.... „Enable‟ to save file to a network folder which supports SAMBA (also known as „Windows Network ... network folder. Samba Server Input the IP address or host name of network file ...
  • Edimax IC-7110W | Manual - Page 67
    2.5.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which are not covered by the motion region setting, and reduce the chances of false alarm. The descriptions of every setting in this menu will be given below: ...
  • Edimax IC-7110W | Manual - Page 68
    ...: Drag the slide to the right to increase sensitivity (camera will detect minor changes in the image), and...). Refresh In case the objects of the image captured by the camera moved, click this button to reload the image captured by camera, so you can decide the motion detection region more precisely...
  • Edimax IC-7110W | Manual - Page 69
    ... so you can identify the mail sent from this camera from others quickly. Input the IP address or host name of the SMTP server (the server that delivers the Email ...this will help you to identify the Email sent by this network camera by sender ‟s Email address. NOTE: Some mail server ...
  • Edimax IC-7110W | Manual - Page 70
    ... SSLv2/v3 function SMTP Authentication Select „Enable‟ if your SMTP server supports SSLv2/v3 such as gmail. Some SMTP server requires mail senders to ... the new settings take effect. After that, you can click „Send a test email‟ to send a testing Email to the address you set here, so you can ...
  • Edimax IC-7110W | Manual - Page 71
    ... here. The descriptions of every setting in this menu will be given below: Item FTP Server FTP Port User Name Password Remote Folder Description Input the IP address or host name of the FTP server you wish to use here. Input the port number of the FTP server you wish to use here. Input the user ...
  • Edimax IC-7110W | Manual - Page 72
    ...is not working, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Upload a test file‟ to send a file to the FTP server you set here, so you can make sure the setting you specified here is correct and working. 71
  • Edimax IC-7110W | Manual - Page 73
    ...given below: Item Enable Cycle Recording Description Check this box and this camera will automatically erase oldest image file to make rooms for new...be added before the file sequence number). Specify the folder name that camera will store the saved image or video clip. File Name Prefix Destination...
  • Edimax IC-7110W | Manual - Page 74
    2.6 System Info You can use this menu to get the operational information of this camera: After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Detailed descriptions of every setting will be given below. 73
  • Edimax IC-7110W | Manual - Page 75
    ... you to set the name and administrator ‟s password of this camera. The descriptions of every setting in this menu will be given ...than one network camera in the same network. Default name begins with „IC-„ plus the last ...one you need when you log onto web management interface and use „admin‟...
  • Edimax IC-7110W | Manual - Page 76
    ... manually‟, you can set the date and time of this camera manually. Please input the date and time you ... 21:24:30 If you select „NTP Server ‟, the camera will get the date and time from NTP Server ... of resident from dropdown menu here. Please input the IP address or host name of NTP server here. ...
  • Edimax IC-7110W | Manual - Page 77
    ISP for the IP address or host name, if they have one. Daylight Saving Time Synchronize to PC time If your area of .... If you wish to use the date and time setting of the computer which is connecting to the camera, click „Synchronize to PC time‟ button. The date and time setting of the computer ...
  • Edimax IC-7110W | Manual - Page 78
    2.6.3 Schedule You can use this menu to setup Schedule Snapshot/Recording settings: Item Enable FTP Schedule Description Select „Enable‟ to send the Schedule Snapshot to the appointed FTP server, or select ‟Disable‟ to disable this function. You have to configure FTP server parameters in ...
  • Edimax IC-7110W | Manual - Page 79
    ... menu first, so this function will take effect. This option allows the network camera to send one image according to the time interval you wish. Select ..., or select „Disable‟ to disable this function. This option allows the network camera to send one recording file according to the time interval ...
  • Edimax IC-7110W | Manual - Page 80
    2.6.4 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the network ...setting in this menu will be given below: Item Upgrade Firmware Description If you downloaded latest ... procedure is done. PLEASE NOTE THAT THE IP ADDRESS OF THE CAMERA WILL RESET TO DEFAULT VALUE: 192....
  • Edimax IC-7110W | Manual - Page 81
    settings. NOTE: IP address will be reset to default value '192.168.2.3' also. You'll need ..., you can click this button to try to reboot the network camera, this may help. Click „Turn off LED light‟ button to switch the LED light of this network camera off, so all LEDs on the network camera will ...
  • Edimax IC-7110W | Manual - Page 82
    2.6.5 Status This menu provides all information about this network camera, like firmware version, system uptime, date / time, and network information. 81
  • Edimax IC-7110W | Manual - Page 83
    2.6.6 System Log All activities of this network camera will be logged, and you are allowed to enter „System Log‟ menu to view these logs. 82
  • Edimax IC-7110W | Manual - Page 84
    ... allow other people to view the live image captured by this camera, but don‟t want to allow them to ... and can not change any system setting. This camera supports up to 16 users. After you .... Select the privilege of this user: Operator (able to enter camera & video menu) or Guest (view images only, ...
  • Edimax IC-7110W | Manual - Page 85
    ... accessing the camera). Add Modify Remove Click this button to add the account. Modify an existing ...(including administrator) will be able to view the image of network camera at the same time. If you wish ...people to view the live image captured by this network camera without typing User name/Password,...
  • Edimax IC-7110W | Manual - Page 86
    2.8 SDHC After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Please click the SD card setting you wish to set, then refer to instructions given below: 85
  • Edimax IC-7110W | Manual - Page 87
    2.8.1 Status Here shows the remaining card space for you. 86
  • Edimax IC-7110W | Manual - Page 88
    ...€Ÿre using SD card to store captured image and video clip, you can have this camera to send an E-mail to you when there‟s only little remaining space left on SD card. Please ...set port number according to your mail server. Select „Enable‟ if your SMTP server supports SSLv2/v3 such as gmail. 87
  • Edimax IC-7110W | Manual - Page 89
    ... of SD card space which will be reserved and will not be used from dropdown menu. User Name Password Reserved Space Click „Apply‟ to save settings and make the new settings take effect. You can click „Send a test email‟ button to send a test E-Mail by the configuration you set here. 88
  • Edimax IC-7110W | Manual - Page 90
    2.8.3 File Management You can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be given below: Item FirstPage PrevPage NextPage LastPage SelectAll ClearAll Delete Description Jump to first page of file list. Jump to previous page of file ...
  • Edimax IC-7110W | Manual - Page 91
    ... like video recording, after this software is installed, you can use your network camera to safeguard your property. Please follow the following instructions to install the surveillance software. 1. Click "16 channel viewer" in supplied CD-ROM, when the...
  • Edimax IC-7110W | Manual - Page 92
    3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, then click „Next‟ to continue. 91
  • Edimax IC-7110W | Manual - Page 93
    4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 92
  • Edimax IC-7110W | Manual - Page 94
    6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (network camera surveillance software will start after you click „Finish‟ button, if you want to start it later, uncheck „Launch IPCam Surveillance Software‟...
  • Edimax IC-7110W | Manual - Page 95
    ... quick launch bar, or start menu to start the network camera surveillance software. Before you start: IP camera surveillance software will only work when your...'t start. Here are descriptions for all components of network camera surveillance software: Video displaying area Language ...
  • Edimax IC-7110W | Manual - Page 96
    ...Display layout Description The image of all connected cameras will be displayed here. Select a language from this dropdown ...more details). This function is only available for supported cameras. There are 8 directions in PTZ control ring.... you connect support PTZ, you can use PTZ control ring to change...
  • Edimax IC-7110W | Manual - Page 97
    ... video file. Snapshot Take a snapshot of current camera. Message display Close window (stop surveillance) Displays all system messages like camera is disconnected etc. Terminates network ... software. Minimize window Minimizes network camera surveillance software window. Video displaying ...
  • Edimax IC-7110W | Manual - Page 98
    ... camera surveillance software, you must configure the camera(s) you wish to connect. Please click ... appear: Please select „Configure Cameras‟ to configure cameras: Note: If you're prompted ...'IPCamViewer ' program, please click 'Unblock' button, of IP camera surveillance software will not be able ...
  • Edimax IC-7110W | Manual - Page 99
    ...the descriptions of all setting items: Item Channel Camera Search Select Description Select the channel number you wish to set. All cameras found on your local network will be displayed in ...local network after last scan. Input the name of camera here. Default value is the first 6 98 Name*...
  • Edimax IC-7110W | Manual - Page 100
    ... easily. Model IP* Username* Web Port* Password Displays the model of selected camera, this field ... Discard all settings in this tab. Video Format** Reset OK Cancel *: It‟s recommended to use ... to fill the content of this field. **: Only available for cameras support this function. After you‟ve ...
  • Edimax IC-7110W | Manual - Page 101
    3.3.1.2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Here are... You can specify the one-time schedule for selected camera; this schedule will be executed once only. Click this ...
  • Edimax IC-7110W | Manual - Page 102
    Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. Edit You can modify a scheduled recording...
  • Edimax IC-7110W | Manual - Page 103
    Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in „To‟ field. You can also click „All Time Record‟ ...
  • Edimax IC-7110W | Manual - Page 104
    3.3.1.3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera. Here are the descriptions of all setting items:...surveillance software will not record the audio captured by this camera. Save settings in this tab. Discard all ...
  • Edimax IC-7110W | Manual - Page 105
    ... With this function activated, only motions captured by the camera will be recorded, so you don‟t have to... record function. Select the time duration that camera will record when a motion has been detected .... Send an alarm when a motion has been detected by the camera. 104 Invoke alarm when motion ...
  • Edimax IC-7110W | Manual - Page 106
    triggered Send mail when motion is triggered OK Cancel Send an email to a pre-defined address when a motion has been detected by the camera. Save settings in this tab. Discard all settings in this tab. 105
  • Edimax IC-7110W | Manual - Page 107
    3.3.2 General Settings You can set system-wide settings of this network camera surveillance software in this menu. 3.3.2.1 „General‟ tab All general settings like file storage directory and recording spaces can be set here. Here are the descriptions of all setting items: Item Data Directory ...
  • Edimax IC-7110W | Manual - Page 108
    ... file size of every video file. When the size of file exceeds this value, network camera surveillance software will open another file to record the video. Define the time period to pause between every camera switch when you activate „Scan‟ function. You can decide the behavior ...
  • Edimax IC-7110W | Manual - Page 109
    ... tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item E-Mail Subject Recipient ...
  • Edimax IC-7110W | Manual - Page 110
    ... E-Mail Address‟ box, and click „Edit‟ to edit the email address. Delete selected email address. Specify the email address of email sender. Specify the IP address or host name of the SMTP server you wish to use. For most of ISPs they will only allow its subscriber to use their SMTP server, if ...
  • Edimax IC-7110W | Manual - Page 111
    3.3.2.3 Security If you don‟t want other people to access this network camera surveillance software, you can set a password to protect it. Youମ.ll need to input the password every time you wish to use this network camera surveillance software: To set password, please use „Security‟ tab in „...
  • Edimax IC-7110W | Manual - Page 112
    ... when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you wish to use here again. 3.3.2.4 About This tab shows the version number of the network camera surveillance software you‟re using. 111
  • Edimax IC-7110W | Manual - Page 113
    112
  • Edimax IC-7110W | Manual - Page 114
    3.4 Change Display Layout This network camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click ... and the video displaying area will change accordingly. Layout style 1: 1 Camera only Displays the video ...
  • Edimax IC-7110W | Manual - Page 115
    Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras. Layout style 5: 9 Cameras Displays the video of up to 9 cameras. Layout style 6: 10 Cameras Displays the video of up to 10 cameras. 114
  • Edimax IC-7110W | Manual - Page 116
    115
  • Edimax IC-7110W | Manual - Page 117
    Layout style 7: 13 Displays the video of up to 13 cameras. Cameras Layout style 8: 16 Displays the video of up to 16 cameras. Cameras 116
  • Edimax IC-7110W | Manual - Page 118
    3.5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button to switch display mode to full-screen mode. To exit full-screen mode, press „ESC‟ key. 117
  • Edimax IC-7110W | Manual - Page 119
    3.6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan ...
  • Edimax IC-7110W | Manual - Page 120
    ), click again to stop scanning (scan icon will become white ). 119
  • Edimax IC-7110W | Manual - Page 121
    3.7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in ... size of a certain object to see its detail. Please select a camera in video displaying area by clicking on its image, then click click ...
  • Edimax IC-7110W | Manual - Page 122
    zoom-in, you may need to use PTZ buttons - described in next section) to find an object you wish to see its detail). 121
  • Edimax IC-7110W | Manual - Page 123
    3.8 PTZ For cameras that support pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera points to, to see different places that fall in the scope of camera‟s view. Please select a camera in video displaying area by clicking on its image,...
  • Edimax IC-7110W | Manual - Page 124
    3.9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 123
  • Edimax IC-7110W | Manual - Page 125
    3.10 Recording You can start video recording of selected camera manually by clicking „Start Recording‟ button: When recording starts, ... displayed in message displaying box like „1/1 10:00:00, Camera 2 Start Manual‟, which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop ...
  • Edimax IC-7110W | Manual - Page 126
    3.11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search...
  • Edimax IC-7110W | Manual - Page 127
    Chapter IV: How to Access the Network Camera Remotely with iPhone & Android Phones IC-7110 series features smart phone support for... check following instruction for installation. The following instruction applies to all Edimax routers Step1: Ensure My-PC is Internet-ready via Router Step 2: Check with...
  • Edimax IC-7110W | Manual - Page 128
    ... "How to apply for a free DNS account in the http://www.dyndns.org " In this guide, we assume you have already got http://my-name.dyndns.org. (yours may vary) and go to Step 3. Step 3: Configure the 1st Camera based on the following: Configure the 2nd Camera based on the following: 127
  • Edimax IC-7110W | Manual - Page 129
    Configure the Broadband Router based on the following: 128
  • Edimax IC-7110W | Manual - Page 130
    4.1 iPhone App Installation Please download „Ediview‟ application from Apple‟s Appstore You can launch EdiView by clicking „EdiView‟ icon. You‟ll see welcome screen and please wait for few seconds 129
  • Edimax IC-7110W | Manual - Page 131
    ... launch EdiView, it will attempt to connect to existing configured network cameras. Please make sure you‟re connected to wireless access point if your Edimax network camera is located on ... 'Cameras' button to abort and setup network camera manually To view more than 4 network camera‟s ...
  • Edimax IC-7110W | Manual - Page 132
    ...switch 1 camera / 4 cameras / 12 cameras view. You can manage network cameras in „Cameras‟ list. To add a new network camera, click „Add New Camera‟. EdiView will search for network camera on your local area network, and list all network cameras found here. 131
  • Edimax IC-7110W | Manual - Page 133
    To add an network camera manually or add an network camera on Internet, click 'Add Camera Manually' button. In this page, you can input network camera‟s parameters manually Camera Type: Switch operating mode between Cloud and IP. In cloud mode you have to input...
  • Edimax IC-7110W | Manual - Page 134
    Camera Name: You can define a name for this network camera to help you to remember the purpose / location of this network camera. IP: Input network camera's IP address or host name. ... '1234' You can also setup video parameters of this network camera. Brightness: Select video brightness ...
  • Edimax IC-7110W | Manual - Page 135
    ... Lowest, select a lower video quality will help when network speed is slow). Tilt Speed: Select camera pan & tilt movement speed. Click 'Done' to save changes To delete an existing IP camera, click „Edit‟ button. Click camera you wish to delete of the IP...
  • Edimax IC-7110W | Manual - Page 136
    Now you can back to „Live‟ menu, if you see a snapshot appear, it indicates the network camera is correctly configured. Click snapshot picture to enlarge video view If network camera you connected supports pan/tilt control, you can click 135
  • Edimax IC-7110W | Manual - Page 137
    ...to slide on the live image view, and network camera will move as your finger slides A white arrow will also appear to indicate the direction of camera movement. Please note: If the button appears... corner shows 'Switch', you can't move camera. To view events (motions detected by network camera...
  • Edimax IC-7110W | Manual - Page 138
    All network cameras will be listed and you can choose one to see its events list. All events of selected network camera will be listed here. You can click an event to see enlarged photo. 137
  • Edimax IC-7110W | Manual - Page 139
    Event‟s snapshot and event date / time will be displayed. Click the button with network camera‟s name (upper-left corner) to go back. You can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily. 138
  • Edimax IC-7110W | Manual - Page 140
    Please note that you need active Internet connection to show map on your iPhone. Click 'Map' button at the bottom of your iPhone to access Map menu. Google map will be shown on your iPhone, and it will attempt to locate your current location by GPS and network. If you're using your iPhone indoor, ...
  • Edimax IC-7110W | Manual - Page 141
    current location manually. If the network camera you're about to mark on the map does ... map and find the location where your network camera is installed. A red pin indicating the location ... center of map. When you found the location where network camera is installed, click „Locate‟ button located ...
  • Edimax IC-7110W | Manual - Page 142
    4.2 Android App installation To install Ediview application, launch „Market‟. (In your Android device‟s „All apps‟ menu) Click magnifier icon at upper-right corner of Android market, and input „Ediview‟ in search field 141
  • Edimax IC-7110W | Manual - Page 143
    You should able able to find Ediview utility (If not, please check spelling), and click „Download‟ to download and install Ediview Android will prompt you to confirm installation, please click „Install‟ button below to start installation 142
  • Edimax IC-7110W | Manual - Page 144
    Please be patient while EdiView is being installed. When EdiView utility is successfully installed, you‟ll see this message. Click „Open‟ to launch EdiView utility now, or click „Complete‟ to launch EdiView 143
  • Edimax IC-7110W | Manual - Page 145
    utility later You can launch EdiView by clicking „EdiView‟ icon in „All Applications When you launch EdiView, it will search for all Edimax network cameras on your network. Please make sure you‟re connected to wireless access point if 144
  • Edimax IC-7110W | Manual - Page 146
    your Edimax network camera is located on your local area network. If you want to ... a Ediamx network camera on Internet, please click 'Manually' button to abort and setup network camera ...to help you to remember the purpose / location of this network camera Cloud / IP Mode Switch: Click this button to ...
  • Edimax IC-7110W | Manual - Page 147
    When an network camera has been added successfully, you‟ll see it appear in EdiView utility‟s camera list 146
  • Edimax IC-7110W | Manual - Page 148
    Please repeat last step to add more network cameras you wish to connect. To repeat last step, press 'Menu' key on your Android device and click 'Add' button If the network camera is connected, you‟ll see a picture appear. Click the Picture to view live image 147
  • Edimax IC-7110W | Manual - Page 149
    ... are new events available, click icon icon To configure network camera's parameters, click When you click an network camera in camera ... your Android device horizontally to enlarge network camera‟s live image view. If the network camera you connected supports Pan & Tilt, you can click button and ...
  • Edimax IC-7110W | Manual - Page 150
    To take a snapshot of current live image and save it on your Android device, click button. You‟ll see „Save Snapshot‟ message appear, which indicates a snapshot has been taken. 149
  • Edimax IC-7110W | Manual - Page 151
    ...you can see the image of up to 4 network cameras at the same time; Click on the camera‟s image ...time. button to see up to 12 network cameras at the To configure the video display parameters of this network ...lower video quality will help. Pan & Tilt speed: configure the camera moving speed when you...
  • Edimax IC-7110W | Manual - Page 152
    Click 'Done' button when you finish, or click 'Cancel' to abort. You'll see the result after you click Done'. When a new event (movement) has been detected by network camera, you‟ll see events. icon appear in network camera list. You can click it to see 151
  • Edimax IC-7110W | Manual - Page 153
    All events will be displayed here, with the time which triggered this event. Click on the event to see enlarged picture The image of this event will be displayed with the time triggered this event. 152
  • Edimax IC-7110W | Manual - Page 154
    To see enlarged picture, hold your Android device horizontally To save a snapshot of this event, click button. You‟ll see „Saved event image successfully‟ message to prompt you that image has been saved successfully. 153
  • Edimax IC-7110W | Manual - Page 155
    When you‟re in camera list, press „Menu‟ button on your Android device. A menu will appear on the bottom of EdiView utility. See live images of network cameras Use google map to locate network cameras Add a new network camera Reload network camera list 154
  • Edimax IC-7110W | Manual - Page 156
    You can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily. Please note that you need active Internet connection to show map on your Android device. Click „Map‟ button at the bottom of ...
  • Edimax IC-7110W | Manual - Page 157
    ... drag the map and find your current location manually. If the network camera you‟re about to mark on the map does not locate at your current location, ... drag the map and find the location where your network camera is installed A blue pin indicating the location of network ...
  • Edimax IC-7110W | Manual - Page 158
    When you found the location where network camera is installed, press „Menu‟ button on your Android device and click „Locate‟ button and a camera list will be shown. Select the network camera you wish to mark on the map. 157
  • Edimax IC-7110W | Manual - Page 159
    ... Please make sure your web browser supports JAVA first. If your web browser does not support JAVA, you can install JAVA from website: www.java.... browser does not support JAVA, you‟ll see this message when you try ..., please use system administrator to launch Internet Explorer. To do so, right-click ...
  • Edimax IC-7110W | Manual - Page 160
    ... camera‟s MAC address. If you don‟t know the MAC address of your Edimax IP camera, you can log onto network camera‟s web configuration menu and click "System" -> "System Information" ->"Status"->"LAN" to see its MAC address. If you see this message, click „Run‟ to ...
  • Edimax IC-7110W | Manual - Page 161
    You should be able to see the image of network camera now. You can click function buttons below. Enlarge / reduce image size Click + or - button to enlarge or reduce image size, this is very useful when 160
  • Edimax IC-7110W | Manual - Page 162
    ... can chage the parameters of IP camera. Click „Apply‟ to save changes or click „Cancel‟ to discard changes. Pan-tilt control Click this button and a set of arrow will be shown on the image. Click the arrow to move network camera to the direction indicated by the arrow. 161
  • Edimax IC-7110W | Manual - Page 163
    Click circle located in the center or arrow set to return network camera to „Home‟ (original) position. If you no longer need to use pan-tilt function, click this button again Snapshot Click this button to take a snapshot of current image and save on your ...
  • Edimax IC-7110W | Manual - Page 164
    Click this button to enlarge image view to full-screen size, all functino buttons will disappear to maximumize display area. Click anywhere in the image to return to normal display mode. 163
  • Edimax IC-7110W | Manual - Page 165
    ... RJ-45 port to connect to 10/100Mbps Ethernet Wireless: IEEE 802.11b.../Audio/LAN/WLAN for wired and wireless model Power/Audio/ACT/LAN... easy-to-find and surveillance utility Provides Web based Management View multiple... surveillance software up to 16 cameras at a time Supports 16 additional user accounts...
  • Edimax IC-7110W | Manual - Page 166
    ...dyndns.org It‟s very likely your IP address (the Internet location) keeps changing every a ...dyndns.org in the iPhone can find out the 2 network camera at My-home. The following are steps to apply for ....dyndns.org is for free for a specific time. However, Edimax does not guarantee this service. 165
  • Edimax IC-7110W | Manual - Page 167
    First, go to http://www.dyndns.org and apply for an account. And follow the steps: Now, you could locate your home network camera using http://your-name.dyndns.org 166
  • Edimax IC-7110W | Manual - Page 168
    167
  • Edimax IC-7110W | Manual - Page 169
    ... If you forget the IP address of the network camera, you will have to reset it to factory default value...168.2.3) by pressing „reset‟ button at the bottom of the network camera. You‟ll need a pen or pin ...If you‟re trying to connect to the network camera from Internet, please make sure the port ...
  • Edimax IC-7110W | Manual - Page 170
    ... if you‟re using PPPoE to connect to Internet. Ask your ISP or network administrator for detailed instruction. Network camera is not responding a. Is the network cable or wireless connection ... camera when you‟re sure that IP address is correct, please contact dealer of purchase for help)....
  • Edimax IC-7110W | Manual - Page 171
    ... uploading (You can try this by clicking „Upload a test file‟ button). c. Make sure the user name...re trying to use pan / tilt function, the servo motor inside the camera may dead. ...heard at An external speaker is required to playback the voice the camera side received at computer side. when I use ...
  • Edimax IC-7110W | Manual - Page 172
    171



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Edimax IC-7110W Manual