Edimax IC-7110W Manual - Page 23
address back to 192.168.2.3.
View all Edimax IC-7110W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can use the example in the picture „192.168.2.339‟). In Subnet mask field, please fill „255.255.255.0‟. Please keep all other fields empty, and click „OK‟. If you changed the IP address of this network camera and you forget it, there‟re 2 methods to recover it: a. Press and hold the „Reset‟ button located at the bottom of this network camera, to clear all settings of the network camera and reset the IP address back to 192.168.2.3. You‟ll lose all settings in the network camera. b. Ask network administrator to check the DHCP release table, if the camera was set to obtain the IP address by DHCP, a new record will be added to DHCP release table on DHCP server when the network camera is connected to the local area network. 22