Edimax PS-1210MFn Manual - Page 54
addresses. Fill in the Starting Address, Range, Subnet Mask
View all Edimax PS-1210MFn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Enable - If the DHCP is enabled, you have to assign a range of IP addresses. Fill in the "Starting Address", "Range", "Subnet Mask", "Gateway" and "DNS"; then the MFP Server will assign a unique IP within the range for each DHCP client. Disable - The DHCP Server is disabled. You have to build up a DHCP Server in the network or set the IP Address for each client manually. 49
49
Enable
– If the DHCP is enabled, you have to assign a range of IP
addresses. Fill in the “Starting Address”, “Range”, “Subnet Mask”,
“Gateway” and “DNS”; then the MFP Server will assign a unique IP
within the range for each DHCP client.
Disable
– The DHCP Server is disabled. You have to build up a
DHCP Server in the network or set the IP Address for each client
manually.