Epson 2190N User Manual - Page 36

Using the Micro Adjust Function on and Tear Off/Bin Set

Get Epson 2190N - FX B/W Dot-matrix Printer PDF manuals and user guides
UPC - 010343850026
View all Epson 2190N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

4 Tear Off/Bin (Set) button Tear Off/Bin lights 5 Menu buttons 6 Load/Eject button 7 Micro Adjust 8 LF/FF button 9 Pause light 10 Pause button 11 Paper Out light Feeds continuous paper forward to the tear-off position. Feeds continuous paper backward from the tear-off position to the top-of-form position. Selects a cut-sheet feeder bin when it is installed. In default setting mode, works as the Set button to select a value. Both flash when continuous paper is in the tear-off position. Both off when continuous paper is not in the tear-off position or when bin 1 of the optional cut-sheet feeder is selected. Both on when the printer is in default setting mode. Left light is on when Card mode is selected. Right light is on when bin 2 of the optional cut-sheet feeder is selected. When you press the Pitch (ItemU) and Tear Off/Bin (Set) buttons at the same time, the printer enters or exits default setting mode. See "Changing the Printer's Default Settings" on page 38. Loads a single sheet of paper. Ejects a single sheet of paper. Loads continuous paper from the standby position. Feeds continuous paper backward to the standby position if a sheet is loaded. When you hold down the Pause button for three seconds, the printer enters the Micro Adjust mode. In this mode, you can press the LF/FF D and Load/Eject U buttons to adjust the top-of-form or tear-off position. See "Using the Micro Adjust Function" on page 31. Feeds paper line by line when pressed quickly. Ejects a single sheet or advances continuous paper to the next top-of-form position when held down. On when the printer is paused. Flashes when the printer is in the Micro Adjust mode. Stops printing temporarily, and resumes printing when pressed again. When held down for three seconds, enters Micro Adjust mode. When pressed again, exits Micro Adjust mode. On when no paper is loaded in the selected paper source or paper is not loaded correctly. Flashes when paper has not been fully ejected or paper is jammed. 36 Using the Control Panel

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
36
Using the Control Panel
4
Tear Off/Bin
(Set) button
Feeds continuous paper forward to the tear-off position.
Feeds continuous paper backward from the
tear-off position to the top-of-form position.
Selects a cut-sheet feeder bin when it is installed.
In default setting mode, works as the Set button to select
a value.
Tear Off/Bin
lights
Both flash when continuous paper is in the tear-off
position.
Both off when continuous paper is not in the tear-off
position or when bin 1 of the optional cut-sheet feeder
is selected.
Both on when the printer is in default setting mode.
Left light is on when Card mode is selected.
Right light is on when bin 2 of the optional cut-sheet
feeder is selected.
5
Menu buttons
When you press the Pitch (Item
U
) and Tear Off/Bin (Set)
buttons at the same time, the printer enters or exits
default setting mode. See “Changing the Printer’s
Default Settings” on page 38.
6
Load/Eject
button
Loads a single sheet of paper.
Ejects a single sheet of paper.
Loads continuous paper from the standby position.
Feeds continuous paper backward to the standby
position if a sheet is loaded.
7
Micro Adjust
When you hold down the Pause button for three
seconds, the printer enters the Micro Adjust mode. In
this mode, you can press the LF/FF
D
and Load/Eject
U
buttons to adjust the top-of-form or tear-off position. See
“Using the Micro Adjust Function” on page 31.
8
LF/FF button
Feeds paper line by line when pressed quickly.
Ejects a single sheet or advances continuous paper to
the next top-of-form position when held down.
9
Pause light
On when the printer is paused.
Flashes when the printer is in the Micro Adjust mode.
10
Pause button
Stops printing temporarily, and resumes printing when
pressed again.
When held down for three seconds, enters Micro Adjust
mode. When pressed again, exits Micro Adjust mode.
11
Paper Out light
On when no paper is loaded in the selected paper
source or paper is not loaded correctly.
Flashes when paper has not been fully ejected or paper
is jammed.