Epson 2190N User Manual - Page 42

Light status O Pause Beep pattern - O Paper Out O Pause O O Tear Off/Bin O O O Font light O O O Pitch light Problem Solution The print head is overheated. Wait a few minutes; the printer resumes printing automatically once the print head cools. The print head is stuck. Turn off the printer and clear any obstruction blocking the print head. Turn the printer back on. If the print head is still stuck, contact EPSON for service. An unknown or fatal printer error has occurred. Turn off the printer and leave it off for several minutes; then turn on the printer again. O = On, O = Flashing ••• = Three beeps Five beeps Clearing Paper Jams 1. Turn off the printer and open the printer cover. 2. If continuous paper is jammed in the printer, tear off the fresh supply at the perforation nearest the paper entry slot. 3. Turn the knob on the left side of the printer away from you to remove the paper in the printer and any remaining pieces of paper. 4. If the paper is stuck where the printer ejects it, gently pull the paper out of the printer. c Caution: Use the knob on the left side of the printer to clear paper jams only when the printer is off. Otherwise, you may damage the printer or change the top-of-form or tear-off position. 5. Close the printer cover and turn on the printer. Make sure the Paper Out light is not flashing and the Pause light is off. 42 Troubleshooting