Epson 6100i Operation Guide - EMP Monitor v4.22 - Page 29

Using the control functions 28 Carrying out control using timer settings This is useful for carrying out certain control operations such as turning a projector's power on and off at specified times every day or every week. Timer settings can be carried out either for a single projector only, or all at once for all projectors in a group. PROCEDURE 1 Select "Timer" - "Timer Settings" from the "Tool" menu. The following window will be displayed and you can then check the timer setting status. The details that can be checked and operations that can be carried out at this time are given below. Projectors Selects a group or projector to check the status of. When a group is selected, the timer setting statuses for all projectors in that group are displayed. Date Shows the current day in a red box. Days for which timer settings have been made are shown in bold. Click or to switch to the calendar for the previous or next month. Timers Shows a list of the timer settings. [Enabled] [Disabled] Switches the timer settings that have been selected from the timer list between enabled and disabled. [Add] Registers new timer settings. [Edit] Lets you change the timer settings that have been selected from the timer list. If a group has been selected for status checking, the settings cannot be changed. [Delete] Lets you delete timer settings that have been selected from the timer list. The colours in the lines of the list have the following meanings: : Current day's timer setting : When some of the projectors in the group have timer setting enabled and others have it disabled for the current day's timer setting : When the current day's timer setting is a disabled setting : Timer setting for a day other than the current day