Epson 7700p User Manual - Page 60
Viewing Lamp Usage and Other Information
View all Epson 7700p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
I Comp2Sync Termination Used for testing. Leave the setting on for normal operation. I Rear Proj. Turn on to project from behind onto a transparent screen. I Ceiling Turn on when the projector is mounted upside-down from the ceiling. 5. When you're finished, press Esc. note If you access the About menu when the projector display is set to video, you only see the lamp life and the video signal setting. Viewing Lamp Usage and Other Information Use the About menu to view information about the display settings of your computer and the number of hours the lamp has been used. 1. Press the Menu button. You see the main menu. 2. Use the arrow buttons (control panel) or the Enter button (remote control) to select About. You see the lamp usage hours and computer display settings on the right: Video Audio Effect Setting Capture Advanced About Reset All Lamp ON Time Video Source Frequency Sync Polarity Sync Mode Resolution Refresh Rate : 9999 H : Computer : H 999. 99 KHz : V 999. 99 Hz : H Positive : V Negative : Sync On Green : 9999x9999 : 999. 9 Hz :Select :Enter The life span of the lamp is about 1500 hours. If the number shown is close to 1500, make sure you have a spare lamp handy. 3. When you're finished, press Esc. 54 Fine-tuning the Projector