Epson 7700p User Manual - Page 91
Connecting the Mouse Cable, Disconnect your Macintosh's mouse cable. Connect the other end
View all Epson 7700p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Connecting the Mouse Cable To use the remote control as a mouse follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you'll need a Macintosh mouse cable; see your projector dealer for help in obtaining the correct cable. 1. Connect the round end of the USB mouse cable (or a Macintosh mouse cable) to the projector's Mouse 1 port. USB mouse cable Mouse 1 port 2. Disconnect your Macintosh's mouse cable. Connect the other end of the projector's mouse cable to the mouse or USB port on your Macintosh. Appendix A: Connecting to Additional Equipment 85
Appendix A: Connecting to Additional Equipment
85
Connecting the Mouse Cable
To use the remote control as a mouse follow the steps below. If the
Macintosh has a USB port, you can use the USB mouse cable
included with the projector. If it has a round mouse port, you’ll need a
Macintosh mouse cable; see your projector dealer for help in obtaining
the correct cable.
1.
Connect the round end of the USB mouse cable (or a Macintosh
mouse cable) to the projector’s
Mouse 1
port.
2.
Disconnect your Macintosh’s mouse cable. Connect the other end
of the projector’s mouse cable to the mouse or USB port on your
Macintosh.
Mouse 1 port
USB mouse cable