Epson 7700p User Manual - Page 87
Connecting the Mouse Cable, Appendix A: Connecting to Additional Equipment
View all Epson 7700p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4. Connect the other end of the computer cable to the computer's video port. 5. Tighten the screws on the connectors. Connecting the Mouse Cable To use the remote control as a mouse, follow the steps below. You'll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect the round end of the mouse cable to the projector's Mouse 1 port, as shown. note If you have a PC with a serial mouse port, you'll need a serial mouse cable. See your projector dealer to obtain the correct cable. PS/2 or USB mouse cable Mouse 1 port 2. Disconnect your mouse from the port on the back of your computer and replace it with the other end of the cable. (Your computer's mouse will be disabled while you are using the remote control as a mouse.) Appendix A: Connecting to Additional Equipment 81