Epson 836XL User Setup Information - Page 53

Removing the Shipping Screws, EPSON Expression 836XL User's Guide. - lamp replacement

Get Epson 836XL - Expression - Flatbed Scanner PDF manuals and user guides
UPC - 010343820098
View all Epson 836XL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Removing the Shipping Screws To prevent damage during shipping, screws are attached to the TPU to secure its lamp assembly. You must remove these screws before using the TPU. To avoid damaging the TPU, make sure you don't leave either of the shipping screws in place when you use the unit. 1. Turn the TPU so the glass side faces up. 2. Use a Phillips (cross head) screwdriver to remove both shipping screws from the holes labeled CLAMP, as shown: storage holes 3. Install the screws in the storage holes labeled STOCK between the shipping holes. Before transporting the scanner, turn it off, remove the TPU, and replace the shipping screws in the outer holes labeled CLAMP. You must also lock the transportation lock screw on the scanner before transporting it. (See your electronic EPSON Expression 836XL User's Guide.) If you can't replace the shipping screws, the TPU's lamp assembly may not be in its home position. Reattach the TPU to the scanner, close the unit, and turn on the scanner. The lamp assembly returns to its home position. Then turn off the scanner, remove the TPU, and insert the screws. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
47
Removing the Shipping Screws
To prevent damage during shipping, screws are attached to the TPU to secure its
lamp assembly. You must remove these screws before using the TPU.
To avoid damaging the TPU, make sure you don’t leave either
of the shipping screws in place when you use the unit.
1.
Turn the TPU so the glass side
faces up.
2.
Use a Phillips (cross head)
screwdriver to remove both
shipping screws from the holes
labeled
CLAMP
, as shown:
3.
Install the screws in the storage
holes labeled
STOCK
between
the shipping holes.
Before transporting the scanner, turn it off, remove the TPU, and replace the
shipping screws in the outer holes labeled
CLAMP
. You must also lock the
transportation lock screw on the scanner before transporting it. (See your electronic
EPSON Expression 836XL User’s Guide.
)
If you can’t replace the shipping screws, the TPU’s lamp
assembly may not be in its home position. Reattach the TPU to
the scanner, close the unit, and turn on the scanner. The lamp
assembly returns to its home position. Then turn off the
scanner, remove the TPU, and insert the screws.
storage
holes