Epson Stylus COLOR 3000 User Manual - Page 117
light is flashing or on., All the lights come on briefly, then go off., All the lights are flashing.
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Troubleshooting The Paper Out light is flashing or on. Possible cause Solution If flashing, paper is jammed. Remove the paper and follow the guidelines for preventing jams on page 6-16. If on, paper is not loaded or Load paper or remove the stack and reload it as described in is loaded incorrectly. Chapter 3. Then press the Load/Eject button to turn off the light and resume printing. If on, the paper-release lever is set incorrectly for the paper you loaded. Set the paper-release lever forward for continuous tractor-fed paper or backward for single sheets. See Chapter 3 for more information. An Ink Out B light is flashing or on. Possible cause Solution If flashing, the ink supply is You need to replace the indicated ink cartridge soon. Make sure getting low. you have a new cartridge, then see Chapter 5 for instructions. If on, the ink cartridge is empty. You must replace the indicated ink cartridge; see Chapter 5 for instructions. All the lights come on briefly, then go off. Possible cause Solution The printer's voltage doesn't match your outlet's voltage. Check the label on the back of your printer to determine its voltage. If it doesn't match your outlet's voltage, turn off the printer and unplug it immediately. Then contact your dealer. Do not plug the printer back in. All the lights are flashing. Possible cause Solution An internal error may have occurred. Turn off your printer, wait five seconds, and turn it on again. If the lights still flash or stay on, contact EPSON as described in the Introduction. 6-9