Epson Stylus COLOR 3000 User Manual - Page 33
Buttons, button to feed - clean print head
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Basic Printing Buttons Operate P LF/FF Load/Eject Pause/Reset Micro Adjust D Micro Adjust U Cleaning B Cleaning A Media Type Turns the printer on and off. Feeds paper line by line. Loads a single sheet or advances continuous or banner paper to the next top-of-form position if held down. When paper is not loaded, loads a sheet of paper or a single sheet of continuous paper. When paper is loaded, ejects a sheet of paper. Feeds continuous (tractor-fed) paper backward to the paper-park position. Ejects banner paper backward. Feeds continuous or banner paper to the tear-off position when pressed after printing and Auto tear-off mode is set to off in default-setting mode. Stops printing temporarily. Resumes printing when pressed again. Clears the printer buffer if pressed for five seconds. Adjusts the loading position or tear-off position for continuous paper. Press the Micro Adjust D button to feed paper forward or press Micro Adjust U to feed paper backward. Micro Adjust settings are saved in the printer's memory. See "Using the Micro Adjust Buttons" on page 3-20 for details on adjusting the loading position or tear-off position. Starts the black print head cleaning cycle if pressed for three seconds. See "Cleaning the Print Heads" on page 5-1. Starts the color print head cleaning cycle if pressed for three seconds. See "Cleaning the Print Heads" on page 5-1. Determines whether the Media Type setting you selected in the printer driver matches the type of media loaded in the printer. Note: The Media Type setting only works when printing from the paper tray. 1-15