Epson Stylus COLOR 3000 User Manual - Page 60

Printing on Special Media Note: Make sure that paper isn't loaded in the manual feeder at the top of the printer before sending your print job. If paper is loaded in the manual feeder, the printer will print on it instead of the paper in the built-in sheet feeder. 13. Now follow the instructions in Chapters 1 or 2 to select the correct Paper Source, Paper Size, and other settings in your printer software. Then send a print job. ◗ If the printer runs out of paper during a print job, reload the paper tray and press the Pause button to continue printing. ◗ If the ink smears on your document, set the thickness lever to the + position and reprint; see page 3-7. ◗ If your margins are not where you like them, adjust them in your application software. However, if the problem seems to be with your paper's loading position, you can change it using the Micro Adjust buttons; see page 3-20 for instructions. Loading Paper in the Manual Feeder You can load one single sheet of paper in the manual feeder without removing paper from the paper tray. Load any type of paper that is between 4.1 inches (105 mm) and 17 inches (432 mm) wide. Always load paper before you send a print job. 1. Turn on the printer. 2. Move the paper-release lever backward to the single sheet position. Note: To load banner paper, canvas cloth, or other roll paper in the manual feeder, you must use the roll paper holder. See page 3-23 for instructions. 3-12