Epson Stylus COLOR 3000 User Manual - Page 139

Specifications 3. While holding down the Media Type button, press the Operate button to turn on the printer to enter default-setting mode. Hold down both buttons for three seconds, then release them. The printer loads a sheet of paper and prints an instruction sheet telling you how to select a language (the default setting is English). 4. If you want to print the default-setting instructions in another language, press the Micro Adjust U button until the Ink Out B Yellow and Ink Out B Magenta lights on your control panel indicate the language you want to use. Language English French German Italian Spanish Portuguese Lights Both lights off Ink Out B Yellow on and Ink Out B Magenta off Ink Out B Yellow flashing and Ink Out B Magenta off Ink Out B Yellow off and Ink Out B Magenta on Both lights on Ink Out B Yellow flashing and Ink Out B Magenta on 5. Press the Pause button. The printer prints instructions on changing the default settings. 6. Follow the instructions on the sheet to change the necessary settings, as listed in the next section. Your changes remain in effect until you change them again. (To exit without changing any settings, press the Pause button.) 7. When you're finished changing settings, press Load/Eject if you need to eject any loaded paper. Then turn off the printer to exit default-setting mode. 8. Wait five seconds, then turn on your printer to resume printing. B-9