Epson Stylus COLOR 3000 User Manual - Page 67

Removing Continuous Paper, Do not perform, steps 2 and 3

Get Epson Stylus COLOR 3000 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Printing on Special Media Caution: If you need to adjust the loading position, see page 3-21. Never use the knob on the left side of the printer to adjust the loading or tear-off positions. This would damage your printer and cause it to lose the top-of-form position. Note: See Appendix B for information on using default-setting mode to change the auto tear-off setting for your print job. 14. Follow the instructions in Chapters 1 or 2 as necessary to send a print job. Be sure to select Tractor Feeder as the Paper Source option and then choose the correct Paper Size. The continuous paper loads and printing begins when the printer receives the print job. Follow the steps in the next section to remove continuous paper correctly. Removing Continuous Paper When you've finished printing a continuous paper document, you must carefully follow these steps to remove it from the printer, depending on your media type and the setting of the auto tear-off feature. 1. If the printer's auto tear-off feature is turned on, your continuous paper is automatically advanced to the tear-off position at the end of a print job. Go to step 2. If the auto tear-off feature is turned off (the default setting), press the LF/FF button as many times as necessary to advance the last printed sheet to the tear-off edge. Go to step 2. If the auto tear-off feature is turned off (the default setting), and you're printing labels, tear off the next sheet of labels at the back of the printer. Then press the LF/FF button on the printer's control panel as many times as necessary to eject the remaining pages from the printer. Do not perform steps 2 and 3. 3-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Printing on Special Media
3-19
14.
Follow the instructions in Chapters 1 or 2 as necessary to
send a print job. Be sure to select
Tractor Feeder
as the
Paper Source option and then choose the correct
Paper
Size
. The continuous paper loads and printing begins
when the printer receives the print job.
Follow the steps in the next section to remove continuous paper
correctly.
Removing Continuous Paper
When you’ve finished printing a continuous paper document,
you must carefully follow these steps to remove it from the
printer, depending on your media type and the setting of the
auto tear-off feature.
1.
If the printer’s auto tear-off feature is turned
on
, your
continuous paper is automatically advanced to the tear-off
position at the end of a print job. Go to step 2.
If the auto tear-off feature is turned
off
(the default setting),
press the
LF/FF
button as many times as necessary to
advance the last printed sheet to the tear-off edge. Go to
step 2.
If the auto tear-off feature is turned
off
(the default setting),
and you’re printing labels, tear off the next sheet of labels at
the
back
of the printer. Then press the
LF/FF
button on the
printer’s control panel as many times as necessary to eject
the remaining pages from the printer.
Do not perform
steps 2 and 3
.
Caution:
If you need to adjust the
loading position, see
page 3-21. Never use the
knob on the left side of
the printer to adjust the
loading or tear-off
positions. This would
damage your printer and
cause it to lose the
top-of-form position.
Note:
See Appendix B for
information on using
default-setting mode to
change the auto tear-off
setting for your print job.