Epson Stylus Pro 9000 Service Manual - Page 125
Top & Bottom (Margin) Adjustment, 1000mm, Printing Pattern, Top Length, Bottom Length, Side Margin
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
EPSON Stylus Pro 9000 Figure 5-11. Feed Distance Check Pattern TOP & BOTTOM (MARGIN) ADJUSTMENT Use this function to adjust the top, bottom, and side margins. 1. Make sure "Adj. Top & Bottom" appears, and press the Enter button. 2. Load a sheet of paper if not already loaded, and press Enter. 3. The printer prints a check pattern and cuts off the paper at a predetermined position. 4. After the printing operation is finished, measure the top, bottom, and right (HP) side margins using a ruler. Press the Paper Feed +/- buttons to enter each of these measurements in 0.1 mm increments when prompted. 5. After entering the measurements, press the SelecType or Item button until "Bottom Length xx.xmm" appears, and then press Enter to finish. Adjustments 1000mm Printing Pattern Top Length 3.0mm Bottom Length 3.0mm Side Margin 3.0mm [SelecType]/[Paper Source] [Enter] End adjustment/ next menu Bottom margin Side margin Feed direction Top margin Figure 5-12. Margin Adjustment Pattern 125